|
por este dispositivo também tem outras instruções :
Facilidade de uso
For details, refer to the operating instructions of the USB device or contact the manufacturer. • If you use a partitioned USB device, only audio files on the first partition can be played. A file cannot be played. • The extension of the file name or file format is not correct. See “Playable Discs/ Files on a USB Device” (page 6). • Check the [MEDIA] setting (page 34). • The system can play to a depth of 8 folders only. • Check that the number of folders is 200 or less. • Check that the number of audio files/JPEG image files in the folder is 150 or less. • Files that are encrypted or protected by passwords, etc. cannot be played. A JPEG image file cannot be • The JPEG image file is larger than 3,072 (width) . 2,048 (height) pixels in viewed. normal format, or more than 2,000,000 pixels in progressive format which is mainly used on Internet Web sites. A video file cannot be played. • The video file is larger than 720 (width) . 576 (height). A WMA file cannot be played. • A WMA file that is in WMA DRM, WMA Lossless, or WMA PRO format cannot be played. An AAC file cannot be played. • An AAC file that is in AAC DRM or AAC Lossless format cannot be played. The titles of folders/files/file • The system can only display numbers and letters of the alphabet. Other names are not displayed characters are displayed as [_]. correctly. File names are not displayed • The character codes that can be displayed by this system are numbers and letters properly. of the alphabet only. Other characters are not displayed correctly. 66GB Symptom Problems and solutions Symptom Problems and solutions – there are many folders or files on the USB device. – the folder or file organization structure is very complex. – the memory capacity is very large. – the file size is extremely large. – the internal memory is fragmented. • The system is playing an audio file in AAC format. A USB device which has been • It may be recorded in an unsupported format. If so, first take the precaution of used on another device does not backing up important files on the USB device by copying them to your work. computer hard disk. Next, format the USB device in FAT12, FAT16, or FAT32 format, and transfer the files to the USB device again. Audio track/file transfer Symptom Problems and solutions You cannot start transferring • The following problems may have occurred. onto a USB device. – The USB device is full. – The number of audio files and folders on the USB device has reached the upper limit. – The USB device is write-protected. Transferring stops before it is finished. Transferring to a USB device results in an error. • The communication speed of the USB device is extremely slow. Connect a USB device that this system can play. • If the transferring and erasing operations are repeated multiple times, the file structure within the USB device becomes complex. Follow the procedure in the operating instructions of the USB device to format the USB device. If the problem persists, contact your nearest Sony dealer. • The USB device is full. • The number of audio files and folders on the USB device has reached the upper limit. • The USB device was disconnected or the power was turned off during erasing. Delete the partially-erased file. If this does not fix the problem, the USB device Additional Information Audio files or folders on the USB device cannot be erased. may be broken. Follow the procedure in the operating instructions of the USB device to format the USB device. If the problem persists, contact your nearest Sony dealer. • Check if the USB device is write-protected. Tuner Symptom Problems and solutions Radio stations cannot be tuned in. • Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. FM reception is poor. • Use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM antenna (aerial). 67GB Control for HDMI Control for HDMI The Control for HDMI function does not work. • Set [CONTROL FOR HDMI] in [HDMI SETUP] to [ON] (page 58). • Make sure that the connected component is compatible with the [CONTROL FOR HDMI] function. • Check the connected component’s setting for the Control for HDMI function. Refer to the operating instructions of the component. • If you change the HDMI connection, connect and disconnect the AC power cord (mains lead), or have a power failure, set [CONTROL FOR HDMI] in [HDMI SETUP] to [OFF], then set to [ON] (page 58). • For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 49). No sound is output from the • Make sure that the connected TV is compatible with the System Audio Control system and TV while using the function. System Audio Control function. • For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 49). Your TV’s input select does not • Set [CONTROL FOR HDMI] in [H...
Este manual também é adequado para os modelos :Home theater - DAV-TZ630 (1 mb)