Assessments - 4, GPA: 3.5 ( )

Fabricante : Sony Arquivo Tamanho: 1.56 mb Arquivo Nome : 4170060121.pdf Língua de Ensino:

Fotos e especificações  Sony  RHT-G11

5 Press AMP MENU. The AMP menu turns off. Note • When “CTRL HDMI” is set to “OFF,” the ARC function and its setting are not available. “BRAVIA” Sync Features 27GB Advanced Settings Advanced Settings Using the AMP menu You can set the following items with AMP MENU on the remote. The default settings are underlined. AMP MENU LEVEL CNT –6, –5, … 0, LEVEL … +5, +6 SW LEVEL –6, –5, … 0, … +5, +6 AUDIO MAX DRC STD OFF TONE BASS –6, –5, … 0, … +5, +6 TREBLE –6, –5, … 0, … +5, +6 AUDIO A/V SYNC ON OFF DUAL MAIN MONO SUB MAIN/SUB NIGHT ON MODE OFF INPUT AUTO MODE OPT SET CTRL HDMI VOL LIMIT** HDMI* PASS THRU** ARC** SYSTEM DIMMER DISPLAY SLEEP AUTO STBY ON OFF MAX, 49, 48, … 2, 1, MIN AUTO ON ON OFF ON OFF ON OFF OFF, 10M, 20M, … 80M, 90M ON OFF * See ““BRAVIA” Sync Features” (page 24). ** This setting appears only when “CTRL HDMI” is set to “ON.” DISPLAY CENTER SUBWOOFER INPUT SELECTOR AMP MENU LEVEL RETURN MENU AMP MENU C, X, x, c, 1 Press AMP MENU to turn on the AMP menu. 2 Press C/X/x/c repeatedly to select the item and the setting. 3 Press AMP MENU to turn off the AMP menu. 28GB Tip Tip These settings are retained even if you disconnect the AC power cord (mains lead). The following pages show details for each setting. Setting the speaker level (CNT LEVEL, SW LEVEL) You can adjust the level and the balance of the speaker and subwoofer. 1 Select “LEVEL” in the AMP menu, then press or c. 2 Select “CNT LEVEL” or “SW LEVEL,” then press or c. • CNT LEVEL: Adjusts the speaker level. • SW LEVEL: Adjusts the subwoofer level. 3 Select the parameter you want. The parameter of “CNT LEVEL” and “SW LEVEL” is from “–6” to “+6” in 1-step increments. The default setting is “0.” Enjoying Dolby Digital sound at low volume (AUDIO DRC) Narrows the dynamic range of the sound track. Useful for enjoying movies at low volume. AUDIO DRC only applies to Dolby Digital sources. 1 Select “LEVEL” in the AMP menu, then press or c. 2 Select “AUDIO DRC,” then press or c. 3 Select the setting. • OFF: No compression of dynamic range. • STD: Reproduces the sound track with the kind of dynamic range that the recording engineer intended. • MAX: Compresses dynamic range fully. Adjusting the bass and treble level (BASS, TREBLE) You can adjust the bass and treble level easily. 1 Select “TONE” in the AMP menu, then press or c. 2 Select “BASS” or “TREBLE,” then press or c. • BASS : Adjusts the bass level. • TREBLE : Adjusts the treble level. 3 Select the desired parameter. The parameter is from “–6” to “+6” in 1-step increments. The default setting is “0.” Adjusting the delay between the sound and the image (A/V SYNC) You can delay the sound using this function when the image is slower than the sound. 1 Select “AUDIO” in the AMP menu, then press or c. 2 Select “A/V SYNC,” then press or c. 3 Select the setting. • OFF: No adjustment. • ON: Adjusts the difference between picture and sound. Notes • You may not be able to adjust the delay between sound and image perfectly using this function. • This function is useful only for Dolby Digital, DTS and Linear PCM (2ch) input via digital coaxial cord, digital optical cord or HDMI cable. continued 29GB Advanced Settings Enjoying multiplex broadcast sound (DUAL MONO) Enjoying multiplex broadcast sound (DUAL MONO) Note • To receive an AC-3 signal, you need to connect a digital satellite tuner to the stand with an optical cable or coaxial cable, and set the digital output mode of the digital satellite tuner to AC-3. 1 Select “AUDIO” in the AMP menu, then press or c. 2 Select “DUAL MONO,” then press or c. 3 Select the setting. • MAIN: Plays back only the main channel. • SUB: Plays back only the sub channel. • MAIN/SUB: Main sound is output from the left speaker and sub sound is output from the right speaker. Enjoying the sound at low volume (NIGHT MODE) You can enjoy sound effects and hear the dialog clearly even at a low volume level using this function. 1 Select “AUDIO” in the AMP menu, then press or c. 2 Select “NIGHT MODE,” then press or c. 3 Select the setting. • ON: Turns on the “NIGHT MODE” function. • OFF: Turns off the function. Tip • You can listen to Dolby Digital sound at low volume by using AUDIO DRC (page 29). Setting the sound from the satellite tuner (INPUT MODE) When multi-channel sound does not output, even if you connect the stand and the satellite tuner via HDMI cable, connect the digital optical cable. 1 Select “AUDIO” in the AMP menu, then press or c. 2 Select “INPUT MODE,” then press or c. 3 Select “OPT.” • AUTO: Preferentially output the sound signal from the HDMI SAT/ CATV input jack. • OPT: Output the signal from the SAT/ CATV OPT jack. Changing the brightness of the front panel display (DIMMER) The brightness of the front panel display can be set to one of 2 levels. 1 Select “SYSTEM” in the AMP menu, then press or c. 2 Select “DIMMER,” then press or c. 3 Select the setting. • ON: Dim. •OFF: Bright. 30GB Changing the display setting (DISPLAY) Changing the display setting (DISPLAY) 1 Select “S...

Baixe o seu

Para fazer o download, introduza 2 dígitos :