Assessments - 3, GPA: 3.7
(
)
)
|
Fotos e especificações Sony BDV-IZ1000W |
Facilidade de uso
O SYSTEM MENU (pages 30, 38, 41, 42) Enters the system menu. P (muting) Turns off the sound temporarily. Q 2 +/– (page 42) Adjusts the volume. R FUNCTION (pages 29, 42) Selects the playback source. S RETURN Returns to the previous display. T TOP MENU Opens or closes the BD’s or DVD’s Top Menu. U Color buttons (red/green/yellow/blue) Shortcut keys for selecting items on some Blu-ray menus (can also be used for Java interactive operations on BDs). V (audio) (pages 39, 40) Selects the audio format/track. W (subtitle) (page 61) Selects the subtitle language when multilingual subtitles are recorded on a BDROM/ DVD VIDEO. D.TUNING (Direct Tuning) (page 42) Tunes in to the desired radio frequency. X Z (open/close) (page 32) Opens or closes the disc tray. Y THEATRE (page 50) Switches to the optimum video mode for watching movies automatically. Z ONE-TOUCH PLAY (page 50) Activates One-Touch Play. 13GB Getting StartedGetting Started Getting StartedGetting Started Step 1: Installing the System Positioning the speakers For the best possible surround sound, place all speakers at the same distance from the listening position (A). The distance can be between 0.0 to 7.0 meters. If you cannot place the center speaker and surround speakers at the same distance as (A), place them within 7.0 meters of the listening position. Place the surround speakers to the rear of the listening position (B). The subwoofer can be placed anywhere in the room. Subwoofer Center speaker AAAAABB45 30 30 45 Front left speaker (L) Front right speaker (R) Surround right speaker (R) Surround left speaker (L) Note • Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • Do not lean or hang on a speaker, as it may fall down. 14GB To add the optional surround back speakers To add the optional surround back speakers For the position of the surround back speakers, refer the illustration below (C). Subwoofer Center speaker 45 45 30 30 CCFront left speaker (L) Front right speaker (R) Surround back right speaker (R) (optional) Surround back left speaker (L) (optional) Surround left speaker (L) Surround right speaker (R) Note • To use the surround back speakers, set [Surround Back] (page 53) in [Speaker Settings] to [Yes] while performing the Easy Setup (page 27). 15GB Getting Started Getting Started Getting Started For assembling the speakers, refer to “Speaker Installation Guide” (supplement). To connect speaker cords to the center speaker and subwoofer Speaker terminals are located on the rear of the speakers. Colored tube (–) (+) Connector Rear of the subwoofer Rear of the center speaker Purple colored tube Green colored tube When installing the speakers on a wall Caution • Contact a screw shop or installer regarding the wall material or screws to be used. • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the colored tube to 3, and the speaker cord without the colored tube to #. Colored tube Front left speaker (L): White Front right speaker (R): Red Center speaker: Green Surround left speaker (L): Blue Surround right speaker (R): Gray 16GB 1 1 Hole on the back of 4 mm 5 mm 10 mm the speaker 30 mm Getting Started 2 Fasten the screws to the wall. For the center speaker For the other speakers 219 mm 8 to 10 mm (8 5/8 inches) 8 to 10 mm 3 Hang the speakers on the screws. Hole on the back of the speaker 5 mm 10 mm Rear of the speaker 17GB Getting Started Getting Started For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. Note • When you connect another component with a volume control, turn down the volume of the other components to a level where sound is not distorted. Connecting the speakers The connector of the speaker cords and the color tube are color-coded depending on the type of speaker. Connect the speaker cords to match the color of the SPEAKERS jacks of the unit. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation (rubber covering) in the speaker terminals. To connect speaker cords to the unit and surround amplifier When connecting ...