Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Depending on the DVD, the audio with priority may be predetermined. In this case, you cannot give priority to the DTS, MPEG AUDIO or Dolby Digital format by selecting “AUTO.” Settings for Speakers (SPEAKER SETUP) Select “SPEAKER SETUP” after pressing DVD SETUP. To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Then use the test tone to adjust the speaker volumes to the same level. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: OFFTEST TONE: FRONT: CENTER: YES BEHIND(LOW) YES YES REAR: SUBWOOFER: To set, press , then . To quit, press ENTER .DVD SETUP xSIZE When you do not connect center or rear speakers, or move the rear speakers, set the parameters for CENTER and REAR. Since the front speaker and subwoofer settings are fixed, you cannot change them. The default settings are underlined. • FRONT — YES • CENTER — YES: Normally select this. — NONE: If you will not connect a center speaker, select this. • REAR — BEHIND (LOW), BEHIND (HIGH), SIDE (LOW), SIDE (HIGH): Specify the position and height to implement the Digital Cinema Surround modes in the “Virtual Multi Dimension” sound field (p. 20) properly. — NONE: If you will not connect a rear speaker, select this. • SUBWOOFER — YES Notes • When you select an item, the sound cuts off for a moment. • Depending on the settings of other speakers, the subwoofer may output excessive sound. Settings 49 Settings for Speakers (SPEAKER SETUP) Settings and Adjustments Specifying the rear speaker position and height If you select other than “NONE” in “REAR,” specify the position and height of the rear speakers, referring to the diagram on page 15. The default setting is underlined. • BEHIND (LOW) Select this if the rear speakers are located in the section Band D. • BEHIND (HIGH) Select this if the rear speakers are located in the section Band C. • SIDE (LOW) Select this if the rear speakers are located in the section Aand D. • SIDE (HIGH) Select this if the rear speakers are located in the section Aand C. These parameters are not available when “REAR“ is set to “NONE”. xDISTANCE You can vary the distance of each speaker as follows. The default adjustments are in the parentheses. • FRONT (5m) Front speaker distance can be set in 0.2 meter steps from 1.0 to 15.0 meters. • CENTER (5m) Center speaker distance can be set in 0.2 meter steps from a distance equal to the front speaker distance to a distance 1.6 meters closer to your listening position. • REAR (3.4m) Rear speaker distance can be set in 0.2 meter steps from a distance equal to the front speaker distance to a distance 4.6 meters closer to your listening position. Notes • When you set the distance, the sound cuts off for a moment. • If each of the front or rear speakers are not placed an equal distance from your listening position, set the distance of the closest speaker. xBALANCE You can vary the balance of each speaker as follows. The default adjustments are in the parentheses. • FRONT (center) Adjust the balance between the front left and right speakers (6 dB (L) to 6 dB (R), 1 dB steps). • REAR (center) Adjust the balance between the rear left and right speakers (6 dB (L) to 6 dB (R), 1 dB steps). xLEVEL You can vary the level of each speaker as follows. The default adjustments are in the parentheses. • CENTER (0 dB) Adjust the level of the center speaker (–6 dB to +6 dB, 1 dB steps). • REAR (0 dB) Adjust the level of the rear speakers (–6 dB to +6 dB, 1 dB steps). • SUBWOOFER (0 dB) Adjust the level of the subwoofer (–6 dB to +6 dB, 1 dB steps). xTEST TONE You can hear the test tone from each speaker in sequence. The default setting is underlined. • OFF: The test tone is not emitted from speakers. • ON: During adjustment of “BALANCE” or “LEVEL,” the test tone is emitted from both speakers simultaneously. To adjust the volume of all the speakers at one time Use the VOLUME control. To return to the default setting Select the item, then press CLEAR. Adjusting the speaker volume 1 When nothing is played, select “SPEAKER SETUP” after pressing DVD SETUP. 2 Select “TEST TONE” and set “TEST TONE” to “ON.” You will hear the test tone from each speaker in sequence. 3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” and “LEVEL” using M/m. During this adjustment, the test tone is emitted from both speakers simultaneously. 4 Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone. 50 Other Controlling the TV with the Supplied Remote Z Operations If you adjust the remote signal, you can control your TV with the supplied remote. Default setting is to control Sony TVs with the gmark. This chapter describes how to set the remote for controlling the TV, listen to the radio, etc. TV ?/1 1 2 3 4 5 6 7 8 9 >10 10/0 Number buttons ENTER Controlling TVs with the remote 1 While holding down TV ?/1, 1 Enter your TV’s manufacturer’s code (see the table on the next page) using the n...