Log:
Assessments - 2, GPA: 4.5 ( )

Instruções de Operação Sony, Modelo DAV-C700

Fabricante : Sony
Arquivo Tamanho: 748.66 kb
Arquivo Nome : 4235691141.pdf
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


Changes the subtitle language. ANGLE (DVD only) (page 52)Changes the angle. REPEAT (page 40)Plays the entire disc (all titles/all tracks) repeatedly, or one title/chapter/track repeatedly. ONE/ALL DISCS (page 37) Selects play mode on one disc or all discs. ADVANCED (DVD only) (page 54) Checks the information (bit rate or layer) on the disc while playing a DVD. CUSTOM PARENTAL CONTROL (page 55) Sets the disc to prohibit playing. SETUP (page 65) CUSTOM Setup By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. RESET Returns the settings in “SETUP” to the default setting. zEach time you press DVD DISPLAY, the Control Menu display changes as follows: , Control Menu display m ADVANCED display (Appears if you select any setting other than “OFF.” See page 54.) m Control Menu display off The Control Menu items are different depending on the disc. zThe Control Menu icon indicator lights up in green when you select “REPEAT” except t “OFF.” The “ANGLE” indicator lights up in green only when the angles can be changed. Getting Started Quick Overview This chapter presents a quick overview so you can begin enjoying your new system right away. For selecting a language used in the on-screen display, refer to the page 66. For selecting the aspect ratio of the TV to be connected, refer to the page 67. Unpacking Check that you have the following items: • Speakers (5) • Subwoofer (1) • AM loop antenna (1) • FM wire antenna (1) • Speaker cords (5m . 4, 15m . 2) (16ft. . 4, 49ft. . 2) • Video cord (1) • Remote commander (remote) RM-SS900 (1) • R6 (size AA) batteries (2) • Foot pads (15) • Speakers-connection and Installation (card) (1) • Quick reference for Remote commander (card) (1) Getting 17 Inserting Batteries into the Remote You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the system. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with an old one. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction. • If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Step 1: Speaker System Hookup Connect the supplied speaker system using the supplied speaker cords by matching the colours of the terminals to those of the cords. Do not connect any speakers other than those supplied with this system. To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on page 25. Required cords Speaker cords The connector and the colour tube of the speaker cords are the same colour as the label of the terminals to be connected. Grey (+) (+) (–) Colour tube (–) Black Terminals for connecting the speakers Terminals for connecting the speakers Connect the To the Front speakers SPEAKER FRONT L (white) and R (red) terminals Rear speakers SPEAKER REAR L (blue) and R (grey) terminals Centre speaker SPEAKER CENTER (green) terminal Subwoofer SPEAKER WOOFER (purple) terminal Front speaker (R) Centre speaker Front speaker (L) Colour label Getting Started VIDEO OUT AUDIO OUT VIDEO IN AUDIO IN L R VIDEO IN AUDIO IN L R VIDEO SVIDEO (DVD ONLY) Y P B/B-Y P R/R-Y FRONT R FRONT LCENTER SPEAKER REAR R REAR LWOOFER COAXIAL AM FM 75. VIDEO 1 MONITOR OUT COMPONENT VIDEO OUT OPTICAL DIGITAL IN DIGITAL (CD ONLY) VIDEO 2 DIGITAL OUT Rear speaker (L) Rear speaker (R) Subwoofer Note on placing speakers Use caution when placing the subwoofer or a speaker stand (not supplied) that is attached with the front/rear speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. continued To avoid short-circuiting the speakers Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord. Examples of bad conditions of the speaker cord Exposed end speaker cord Exposed end cords are is touching another speaker touching each other due to terminal. sloppy removal of insulation. After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, see page 28. If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker other than the one currently displayed on the front panel display, the speaker may be short-circuited. If this h...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias