Assessments - 2, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Video may look slower than the audio if it is connected with digital TV. In this case, adjust the delay time of audio to optimal status to fit the video. Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTER button. Press the MENU button. 1 2 3 4 Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. Setting the Test Tone Press the Test Tone to check the speaker connections and to adjust the speaker levels. In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. In the Speaker Setup, press the ENTER button again. L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press Cursor , , , buttons to move to the desired speaker and then press ENTER button. • For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL . NONE. • For L and R, the mode is set to SMALL. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 53 54 SETUP SMALL : Select this when using the speakers. NONE : Select this when no speakers are installed. 1 2 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. 3 Press Cursor button to move to ‘TEST TONE’ and then press ENTER button. • The test tone will be sent to L . C . R . RS . LS . SW in that order. If the ENTER button is pressed again at this time, the test tone will stop. To end the test tone, press TEST TONE button. Press TEST TONE button. • Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. • Use this function to check that each speaker is correctly connected and that there is no problem. When manually testing using the TEST TONE button Multi-Channel Pro Logic Mode Start • Depending on PRO LOGIC and STEREO, the speaker mode may vary. Note 55 56 Seting up the Speaker Delay T ime Whtehnea 5dr.is1ipvtCleaH necacfe tfSemt uhcbetre rnt otoltiw us otntehfe desn pSisn eyogaou kpuneo darsnois,tdf i o y pteonhlau eayctCeh ad esni,nfp fytaeodrareuj kuSn ecstpa rt e nitmsah ekietshnes ejdr o d iayfsefn aetpdhmreSnen bd.uc Df: The distance from FRONT SPEAKER Dc: The distance from CENTER Ds: The distance from SURROUND Ideal CENTER SPEAKER placement It is desirable to place all speakers within Ideal SURROUND SPEAKER placement • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance in the figure, set the mode as 0ms. change the setting according to • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • With (Dolby Pro Logic II), the delay time may • With AC-3 and DTS, the delay time Note Ideal CENTER SPEAKER placement It is desirable to place all speakers within Ideal SURROUND SPEAKER placement • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance in the figure, set the mode as 0ms. change the setting according to • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • With (Dolby Pro Logic II), the delay time may • With AC-3 and DTS, the delay time Note Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 4 , Press Cursor , Press Cursor button Press Cursor button 1 1 In Stop mode, Press Cursor , , buttons to move to move to ‘Audio’ and to move to ‘DELAY press MENU to set the Delay to the desired 2 then press ENTER TIME’ and then press 3 5 button. time. speaker and then button. ENTER button. press ENTER button. • You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. SETUP Distance between Df and Dc Delay Time 0.00 m 0 ms 0.34 m 1 ms 0.68 m 2 ms 1.02 m 3 ms 1.36 m 4 ms 1.70 m 5 ms Distance between Df and Ds Delay Time 0.00 m 0 ms 1.02 m 3 ms 2.04 m 6 ms 3.06 m 9 ms 4.08 m 12 ms 5.10 m 15 ms 57 Setting the Audio Quality You can adjust the balance and level for each speaker. 1 2 3 4 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button. Press Cursor , , , buttons to select the desired item and then press ENTER button. Adjusting Front/Rear Speaker Balance • You can select between 00 and –06 and OFF. • The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level • The volume level can be adjusted in steps from +6dB to –6dB. • The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Method 1 When adjusting the a...
Este manual também é adequado para os modelos :Home theater - HT-DS403 (8.32 mb)
Home theater - HT-DS420 (8.32 mb)
Home theater - HTDS400 (8.32 mb)