Assessments - 3, GPA: 4.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
placement It is desirable to place all speakers within this circle. Ideal REAR SPEAKER placement Df: The distance from FRONT SPEAKER Otherwise, change the setting according to the table. Dc: The distance from Centre SPEAKER Dr: The distance from REAR SPEAKER Distance between Df and Dc 0.00 m 0.34 m 0.68 m 1.06 m 1.40 m 1.76 m Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Distance between Df and Dc 0.00 m 1.06 m 2.11 m 3.16 m 3.62 m 5.29 m Delay Time 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms M ` With PL II (Dolby Pro Logic II), the delay time may be different for each mode. ` With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. ` The Centre channel is only adjustable on 5.1 channel discs. ENG SETTING THE TEST TONE Use the Test Tone feature to check the speaker connections. 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Audio and then press the ENTEr button. 3. Press the Cursor % button to move to TEST TONE and then press the ENTEr button. • The test tone will be sent to L . C . r . Sr . SL . SW in order. If the ENTEr button is pressed again at this time, the test tone will stop. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen. SETTING THE AUDIO . SYSTEM SETUP MOVE ENTER EXITRETURN STOP EXIT You can adjust the balance and level for each speaker. 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Audio and then press the ENTEr button. 3. Press the Cursor % button to move to SOUND EDIT and then press the ENTEr button. 4. Press the Cursor .,. button to select and adjust the desired item. Press the Cursor .,. button to adjust the settings. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen. MOVE ENTER EXITRETURN MOVE CHANGE EXITRETURN 49 50 System setup Setting the Audio Press the SOUND EDIT button and then press the Cursor .,. button. Adjusting Front/Rear Speaker Balance `` You can select between 0, -6, and OFF. `` The volume decreases as you move closer to –6. Adjusting Centre/Rear/Subwoofer Speaker Level `` The volume level can be adjusted in steps from +6dB to –6dB. `` The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Setting the DRC (Dynamic Range Compression) This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Audio and then press the ENTER button. 3. Press the Cursor % button to move to DRC and then press the ENTER button. 4. Press the Cursor .,. to adjust the DRC. • When the Cursor . button is pressed, the effect is greater, and when the Cursor . button is pressed, the effect is smaller. d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen. Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button. MOVE ENTER RETURN EXIT CHANGE RETURN EXIT EN SETTING THE AV SYNC Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. 1. In Stop mode, press the MENU button. 2. Press the Cursor % button to move to Audio and then press the ENTEr button. 3. Press the Cursor % button to move to AV-SYNC and then press the ENTEr button. 4. Press the Cursor .,. button to select the AV-SYNC Delay Time and then press the ENTEr button. • You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen. SETTING THE HDMI AUDIO . SYSTEM SETUP MOVE ENTER EXITRETURN MOVE SELECT EXITRETURN The audio signals transmitted over the HDMI Cable can be toggled ON/OFF. 1. In Stop mode, press the MENU button. 2. Press the Cursor . button to move to Audio and then press the ENTEr button. 3. Press the Cursor . button to move to HDMI AUDIO and then press the ENTEr button. 4. Press the Cursor .,. button to select ON or OFF and then press the ENTEr button. • ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. • OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home theatre speakers only. d Press the rETUrN button to return to the previous level. d Press the EXIT button to exit the setup screen. MOVE ENTER EXITRETURN MOVE SELECT EXITRETURN M ` The default setting of this function is HDMI AUDIO OFF. ` HDMI AUDIO is automatically down-mixed to 2ch for TV speakers. ` When HDMI AUDIO is on,PRO LOGIC II /DSP EQ/P.BASS doesn't work. 51 52 System setup Sound Field (DSP)/EQ Function DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. EQ : You can select ROCK, POPS, to optimize the sound for th...
Este manual também é adequado para os modelos :Home theater - HT-TZ225 (9.83 mb)
Home theater - HT-Z220 (9.83 mb)