Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Using the Plug and Play Plug allows you to store all available radio stations automatically. 1 AUTO INSTALL.. START..2 DVD system’s display panel 1 For first time setup, press TUNER. . "AUTO INSTALL PRESS PLAY" appears. 2 Press PLAY B until "START ..." appears on the display panel. . The system will start searching from FM band and followed by MW band. All the available radio stations with strong signal strength will be stored automatically. . Once complete, the last tuned radio station will play. 36 3139 115 2xxx1 001-045-hts3050-16-Eng2 36 4/1/06, 3:19 PM Tuner Operations (continued) Automatic presetting Use automatic presetting to store or reinstall all the preset radio stations. 1 2 DVD system’s display panel FM / MW START.. 1 Press TUNER on the remote to select “FM” or “MW”. 2 Press and hold PROG until "START ..." appears. . All the former presets will be overwritten. Manual presetting Use manual presetting to store only your favourite radio stations. 1 Tune to your desired radio station (see “Tuning to radio stations”). 2 Press PROG. 3 Press S / T to select a preset number that you want to store the current radio station. 4 Press PROG again to store. Selecting a preset radio station . Press TUNER on the remote, then press S / T to select a preset number (or use the numeric keypad on the remote). . The waveband, preset number followed by radio frequency will appear. Deleting a preset radio station 1 In tuner mode, press S / T on the remote to select a preset radio station. 2 Press and hold 9 until “FM/MW X DELETED” appears. . “X” is the preset number. . The radio station continues to play but has been deleted from the preset list. . The rest of the preset radio station number remain unchanged. English 37 001-045-hts3050-16-Eng2 37 4/1/06, 3:19 PM 3139 115 2xxx1 Sound and Volume Controls English Individual speakers volume adjustment You can adjust the delay times (centre, rear speakers and subwoofer only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. IMPORTANT! Press SURR button on the remote to select Multi-channel surround mode before adjusting the speaker settings. 1 Press C twice to stop playback (if any), then press SETUP. 2 Press 2 repeatedly to select { Audio Setup Page }. 3 Use 34 keys to highlight { Speakers Volume }, then press 2. Audio Setup Page Speakers Volume Speakers Delay Night Mode Front Left Front Right Center Subwoofer Rear Left Rear Right 0dB 0dB +3dB +3dB +3dB +3dB Speakers Level Setup 6 Use 34 keys to highlight { Speakers Delay }, then press 2. Audio Setup Page Speakers Volume Speakers Delay Night Mode CD Upsampling Center Rear Left Rear Right Speakers Distance Setup 0ms 0ms 0ms 7 Use 1 2 keys to set the delay times for centre and rear speakers that best suit your surround sound needs. 8 Press OK to confirm. Helpful Hints: – A 1ms increase/decrease of delay time is equivalent to 30cm change in distance. – Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers. – The test tone will be automatically generated to help you judge the sound level of each speaker. 4 Use 1 2 keys to set the volume level for each speaker (-6dB ~ +6dB). 5 Press OK to confirm. TIPS: The underlined option is the factory default setting. To return to the previous menu, press 1. To remove the menu, press SETUP. 38 3139 115 2xxx1 001-045-hts3050-16-Eng2 38 4/1/06, 3:19 PM Sound and Volume Controls (continued) Selecting surround sound . Press SURR on the remote to select : MULTI-CHANNEL or STEREO. . The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc. . The centre and surround speakers operate only in Multi-channel surround mode. . The available output modes for Multichannel include: Dolby Digital and Dolby Pro Logic II. . Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode. However, mono (single channel sound) sources will not produce any sound from the surround speakers. Helpful Hints: – You are not able to select the surround sound mode if the system setup menu is turned on. – Ensure that the audio output of the disc is set to Dolby Digital if there is no sound output on yur speakers during playback. Selecting digital sound effects Select a preset digital sound effects that matches your disc’s content or that optimises the sound of the musical style you are playing. . Press SOUND to select the available sound effect. When playing movie discs or in TV mode, you can select : CONCERT, DRAMA, ACTION or SCI-FI. When playing music discs or while in TUNER or AUX/DI mode, you can select : ROCK, DIGITAL, CLASSIC or JAZZ. Helpful Hint: – For flat sound output, select CONCERT or CLASSIC. Volume control . Adjust VOLUME control (or press VOL +/- on the remote) to increase or decrease the volume level. . "VOL MIN" is the minimum volume level and “VOL MAX” is the ...