Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Select a connected device Type. • TV : Select if connected to a TV via HDMI. • Monitor : Select if connected to a Monitor via HDMI. 22 English 03 Setup Audio Speaker Setting Speaker Size You can set the Speaker Size of the Center and Rear Speakers, as well as Test Tone in this mode. Settings Move Select Return Speaker Setting Speaker Size > Sound Edit Delay Time Test Tone : Off Select Return • For the Front speakers, the mode is set to Small. • For the Subwoofer, the mode is set to Present. • For the Centre and Rear speakers, you can switch the mode to Small or None. -Small : Select this when using the speakers. -None : Select this when no speaker is connected. .NOTE . The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings. Sound Edit You can adjust the balance and level for each speaker. Settings Move Select Return Sound Edit Change Select Return dB dB dB dB dB dB dB Front Bal. Rear Bal. Center Level Rear Level SW Level R R L L Press the ^Ў buttons to select and adjust the desired speaker. Press the <> buttons to adjust the settings. Adjusting Front/Rear Speaker Balance . You can select between 0 and -6. . The volume decreases as you move closer to –6. Adjusting Centre/Rear/Subwoofer Speaker Level . The volume level can be adjusted in steps from +6dB to –6dB. . The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Centre and Rear speakers. You can also set the Test Tone in this mode. Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Rear Speakers. .NOTE . The Delay Time menu will be activated only when the 5.1 channel source is played. . You can not set Centre and Rear in this mode when their Speaker Size is set to None. Settings Move Select Return Delay Time Front Center : 00mSEC Rear : 10mSEC Subwoofer Test Tone : Off Change Select Return English 23 Setup Test Tone Ideal Centre Speaker placement Place all speakers within this circle. Ideal Rear Speaker placement Df: The distance from Front Speaker Dc: The distance from Centre Speaker Dr: The distance from Rear Speaker Setting the Centre Speaker If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m Delay Time 00 ms 01 ms 02 ms 03 ms 04 ms 05 ms Setting the Rear Speaker If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Dr and Dc 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m Delay Time 00 ms 03 ms 06 ms 09 ms 12 ms 15 ms .NOTE . With PL II (Dolby Pro Logic II), the delay time may be different for each mode. . With AC-3, the delay time can be set between 00 and 15mSEC. . The Centre channel is only adjustable on 5.1 channel discs. Settings Move Select Return Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : On > Select Return Use the Test Tone feature to check the speaker connections. • Press the <> buttons to select On. • The test tone will be sent to Front Left . Center . Front Right . Rear Right . Rear Left . Subwoofer in order. To stop the test tone, press the ENTER button. DRC (Dynamic Range Compression) This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. • You can select either off, 2/8, 4/8, 6/8, Full. AV-SYNC Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video • You can set the audio delay time between 0 mSec and 300 mSec. Set it to the optimal status. HDMI AUDIO The audio signals transmitted over the HDMI Cable can be toggled On/Off. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only. 24 English 03 Setup . . . NOTE The default setting of this function is HDMI Audio Off. . . NOTE The selected language will only appear if it is HDMI Audio is automatically down-mixed to 2ch supported on the disc. for TV speakers. Security . When HDMI Audio is set to On, PL II /DSP EQ /P.BASS doesn't work. EQ Optimizer Set optimal EQ automatically depending on the region. The Parental Lock function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that y...