Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
When a new station is stored in the memory, the station previously memorised for that preset channel number will be erased. nDAB Frequency table (BAND III) Frequency Label Frequency Label 174.928 MHz 5A 208.064 MHz 9D 176.640 MHz 5B 209.936 MHz 10A 178.352 MHz 5C 211.648 MHz 10B 180.064 MHz 5D 213.360 MHz 10C 181.936 MHz 6A 215.072 MHz 10D 183.648 MHz 6B 216.928 MHz 11A 185.360 MHz 6C 218.640 MHz 11B 187.072 MHz 6D 220.352 MHz 11C 188.928 MHz 7A 222.064 MHz 11D 190.640 MHz 7B 223.936 MHz 12A 192.352 MHz 7C 225.648 MHz 12B 194.064 MHz 7D 227.360 MHz 12C 195.936 MHz 8A 229.072 MHz 12D 197.648 MHz 8B 230.784 MHz 13A 199.360 MHz 8C 232.496 MHz 13B 201.072 MHz 8D 234.208 MHz 13C 202.928 MHz 9A 235.776 MHz 13D 204.640 MHz 9B 237.488 MHz 13E 206.352 MHz 9C 239.200 MHz 13F * Frequencies are displayed to two decimal places on this unit. Timer and sleep operation (Remote control only) STANDBY/ON CLOCK/TIMER SLEEP PRESET MEMORY/FOLDER+ DVD/CDTUNER/DABSCANENTER(DAB)DISPLAY PRESET ENTER Timer playback: The unit turns on and plays the desired source (DISC, Tuner, DAB, USB Audio, USB Video, iPod, Line In) at a preset time. This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Once timer: Once timer play works for one time only at a preset time. (“ ” indicator). Daily timer: Daily timer play works at the same preset time every day that we set. For example, set the timer as a wake-up call every morning. (“DAILY” indicator). Using the once timer and daily timer in combination: For example, use the once timer to listen to a radio programme, and use the daily timer to wake up. 1 Set the daily timer (page 41 - 42). 2 Set the once timer (page 41 - 42). Once timer Daily timer Start Stop 1 minute or more Start Stop nTimer playback Before setting timer: . Check that the clock is set to the correct time (refer to page 18). If it is not set, you cannot use the timer function. . For timer playback: Plug in USB or load discs or dock iPod to be played. 1 Press the STANDBY/ON button to turn the power on. 2 Press and hold the CLOCK/TIMER button. 3 Within 30 seconds, press the or button to select “Once” or “Daily”, and press the ENTER button. 4 Within 30 seconds, press the or button to select "Timer set", and press the ENTER button. 5 To select the timer playback source (DISC, Tuner, DAB, USB Audio, USB Video, iPod, Line In), press the PRESET + or – button. Press the ENTER button. When you select the tuner, select a station by pressing the or button, and then press the ENTER button. If a station has not been programmed, “No Preset” will be displayed and timer setting will be cancelled. 6 To adjust the day, press the or button and then press the ENTER button. 7 Press the ENTER button to adjust the hour. Press the the or button and then press the ENTER button. 8 To adjust the minutes, press the the or button and then press the ENTER button. 9 Set the time to finish as in steps 7 and 8 above. 10Adjust the volume using the VOL + or – button, and then press the ENTER button. Do not turn the volume up too high. En-41 Timer and sleep operation (Remote control only) (continued) 3 Within 30 seconds, press the or button to select stand-by mode. The “TIMER” indicator lights up and the 11Press the STANDBY/ON button to enter the power "Timer On", and press the ENTER button. unit is ready for timer playback. 4 Press the STANDBY/ON button to enter the power stand-by mode. 12When the preset time is reached, playback will start. The volume will increase gradually until it reaches the preset volume. The timer indicator will blink during timer playback. 13When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be cancelled. Daily timer: The timer operates at the same time every day. It will continue until the daily timer setting is cancelled. Cancel the daily timer when it is not in use. Notes: . When performing timer playback using external unit connected to the USB terminal or LINE IN connector, select related source in step 5. . This unit will turn on or enter the power stand-by mode automatically. However, the connected unit will not turn on or off. To stop the timer playback, follow step “Cancelling the timer setting” of page 42. Checking the timer setting: 1 Turn the power on and press and hold down the CLOCK/ TIMER button. or button to select “Once” or “Daily”, and press the ENTER button. 2 Within 30 seconds, press the 3 Within 30 seconds, press the or button to select "Timer Call", and press the ENTER button. Cancelling the timer setting: 1 Turn the power on and press and hold down the CLOCK/ TIMER button. 2 Within 30 seconds, press the or button to select “Once” or “Daily”, and press the ENTER button. 3 Within 30 seconds, press the or button to select "Timer Off", and press the ENTER button. Timer will be cancelled (the setting will not be cancelled). Reusing the memorised timer setting: The timer setting will be memorised once it is entered. To reuse the same setting, perform...