Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Home theater - BDV-E490 (2.11 mb)
Home theater - BDV-E490 (2.11 mb)
Home theater - BDV-E490 (995.51 kb)
Home theater - BDV-E490 (3.39 mb)
Facilidade de uso
Sound There is no sound. t The speaker cords are not connected securely. t Check the speaker settings (page 35). There is no sound from the TV via the HDMI (OUT) jack when using the Audio Return Channel function. t Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] (page 44). Also, set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Auto] (page 44). t Make sure that your TV is compatible with the Audio Return Channel function. t Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function. The system does not output sound of TV programs correctly when connected to a set- top box. t Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off] (page 44). t Check the connections (page 18). Severe hum or noise is heard. t Move your TV away from the audio components. t Clean the disc. The sound loses stereo effect when you play a CD. t Select stereo sound by pressing AUDIO (page 32). The sound comes from the center speaker only. t Depending on the disc, the sound may come from the center speaker only. No sound or only a very low-level sound is heard from the surround speakers. t Check the speaker connections and settings (pages 16, 35). t Check the sound mode setting (page 22). t Depending on the source, the effect of the surround speakers may be less noticeable. t A 2-channel source is being played. Additional Information 49GB Distortion occurs in the sound of a connected component. t Reduce the input level for the connected component by setting [Attenuate -AUDIO] (page 42). Tuner Radio stations cannot be tuned in. t Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary. t The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning. Playback The disc does not play. t The region code on the BD/DVD does not match the system. t Moisture has condensed inside the unit and may cause damage to the lenses. Remove the disc and leave the unit turned on for about half an hour. t The system cannot play a recorded disc that is not correctly finalized (page 52). File names are not displayed correctly. t The system can only display ISO 8859-1 compliant character formats. Other character formats may be displayed differently. t Depending on the writing software used, the input characters may be displayed differently. A disc does not start playing from the beginning. t Resume play has been selected. Press OPTIONS and select [Play from start], then press . Playback does not start from the resume point where you last stopped playing. t The resume point may be cleared from memory depending on the disc when • you open the disc tray. • you disconnect the USB device. • you play other content. • you turn off the unit. The language for the soundtrack/subtitle or angles cannot be changed. t Try using the BD’s or D...
Este manual também é adequado para os modelos :Home theater - BDV-E190 (2.44 mb)
Home theater - BDV-E290 (2.44 mb)
Home theater - BDV-E690 (2.44 mb)