Assessments - 1, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Home theater - BDV-L800M (3.08 mb)
Home theater - BDV-L800M (3.06 mb)
Home theater - BDV-L800M (1.3 mb)
Facilidade de uso
The system does not work • Disconnect the AC power cord (mains lead) from the wall outlet (mains), then normally. reconnect after several minutes. Messages Symptom Problems and solutions [A new software version is • See [Network Update] (page 61) to update the system to a newer software available. Please go to the version. “Setup” section of the menu and select “Network Update” to perform the update.] appears on the TV screen. “PROTECTOR” and “PUSH Press "/1 to turn off the system, and check the following items after PWR” appear alternately in the “STANDBY” disappears. front panel display. • Is anything blocking the ventilation openings of the system? • After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. “LOCKED” appears in the front • Set the child lock function to off (page 51). panel display. “DEMO LOCK” appears in the • Contact your nearest Sony dealer or local authorized Sony service facility. front panel display. “Exxxx” appears in the front • Contact your nearest Sony dealer or local authorized Sony service facility and panel display. give the error code. appears without any • Contact your nearest Sony dealer or local authorized Sony service facility. messages on the entire TV screen. Additional Information 69GB Picture Picture There is no picture. • Check the output method on your system (page 19). There is no picture when you • The main unit is connected to an input device that is not HDCP (Highmake an HDMI cable bandwidth Digital Content Protection) compliant (“HDMI” on the front panel connection. does not light up) (page 19). • Check that the HDMI OUT jack of the main unit and the HDMI IN jack of your TV are connected via a High Speed HDMI cable. 3D images from the HDMI IN 1 • Depending on the TV or video component, 3D images may not appear. or HDMI IN 2 jack do not appear • The TV may take time to detect 3D signals. on the TV screen. No picture appears when the • Press and hold N and VOL – on the main unit for more than 5 seconds to reset video output resolution selected the video output resolution to the lowest resolution. in [Output Video Format] is incorrect. The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 43). dark/the bright area is too bright or unnatural. The picture is not output correctly. • Check the [Output Video Format] settings in [Screen Settings] (page 61). • If the analog and digital signals are output at the same time, set [BD/DVDROM 1080/24p Output] in [Screen Settings] to [Off] (page 62). • For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in [Screen Settings] (page 62). Picture noise appears. • Clean the disc. • If the picture output from your system goes through your VCR to get to your TV, the copy-protection sign...
Este manual também é adequado para os modelos :Home theater - BDV-L600 (2.93 mb)
Home theater - BDV-L800 (2.93 mb)