Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
to the tool. • Never carry the tool by the hose. • Avoid unintentional starting. Don’t carry an air tool which is connected to an air hose, with your finger on the trigger. • Repair servicing should be done only by an authorized service representative. • Air tools can cause the workpiece to move upon contact leading to injury. • Use clamps or other devices to prevent movement. Risk to injury (cont.) • Loss of control of the tool can lead to injury to self or others. • Never operate tool while under the influence of drugs or alcohol. • Don’t overreach. Keep proper footing and balance at all times. • Keep handles dry, clean, and free from oil and grease. • Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired. • Poor quality, improper, or damaged tools such as grinding wheels, chisels, sockets, drills, nailers, staplers, etc., can fly apart during operation, propelling particles throughout the work area causing serious injury. • Always use tool attachments rated for the speed of the air tool. • Never use air tools which have been dropped, impacted or damaged by use. • Use only impact grade sockets on an impact wrench. • Do not apply excessive force to the tool, let the tool perform the work. • Fasteners could ricochet or be propelled causing serious injury or property damage. • Never point discharge of tool at self or others. • Do not pull trigger unless tool contact safety device is against work surface. • Never attempt to drive fasteners into hard surfaces such as steel, concrete, or tile. • Take care to avoid driving a fastener on top of another fastener. • Position tool carefully so that fasteners will be delivered to the proper location. • Improperly maintained tools and accessories can cause serious injury. • Maintain the tool with care. • Keep a cutting tool sharp and clean. A properly maintained tool, with sharp cutting edges reduces the risk of binding and is easier to control. • There is a risk of bursting if the tool is damaged. • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the tool serviced before using. • Use only accessories identified by the manufacturer to be used with specific tools. • Use of an accessory not intended for use with the specific tools, increases the risk of injury to persons. Risk of electric shock What could happen How to prevent it • Using air tools to attach electrical wiring may result in electrocution or death. • Never use nailer/staplers to attach electrical wiring while energized. • Contact with a “live” wire will also make exposed metal parts of the tool “live” and may result in electrocution or death. • Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. • Fasteners coming in contact with hidden electrical wiring may cause electrocution or death. • Thoroughly investigate the workpiece for possible hidden wiring before performing work. Risk of entanglement What could happen How to prevent it • Tools which contain moving elements, or drive other moving tools, such as grinding wheels, sockets, sanding discs, etc. can become entangled in hair, clothing, jewellery and other loose objects, resulting in severe injury. • Never wear loose fitting clothes, or apparel which contains loose straps or ties, etc. which could become entangled in moving parts of the tool. • Remove any jewellery, watches, identifications, bracelets, necklaces, etc. which might become caught by the tool. • Keep hands away from moving parts. Tie up or cover long hair. • Always wear proper fitting clothing and other safety equipment when using this tool. Risk of cut or burns What could happen How to prevent it • Tools which cut, shear, drill, staple, punch, chisel, etc. are capable of causing serious injury • Keep the working part of the tool away from hands and body. Know your product Before using the impact wrench, familiarise yourself with all the operating features and safety requirements. Use the tool only for the applications intended. All other applications are expressly ruled out. 1.Drive anvil 2.Rubber nose guard 3.Body 4.Adjustable speed control 5.Contoured pistol grip 6.Air inlet 7.Exhaust port 8.Trigger 9.Impact mechanism oil port 2 3 1 4 8 9 5 6 7 Additional safety instructions for impact wrenches This air impact wrench kit is designed for removing and installing nuts and bolts. With one hammer (Rocking Dog) impact mechanism and useful accessories, this kit is used as a general purpose tool kit by DIYers and hobbyists. 1. This impact wrench is a part of a high pressure system. Do not exceed maximum operating pressure of the air tool (90PSI). The impact wrench could explore and may result in death or serious injury. 2. Disconnect the impact wrench from air compressor before changing tools or accessories, servicing and during non-operation. 3....
Este manual também é adequado para os modelos :Brocas e shuropopverty - ATIW1 (314.98 kb)