Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
No de Cat. 2601-20 18 VOLT 1/2" COMPACT DRIVER DRILL PERCEUSE-VISSEUSE COMPACTE D’13 mm (1/2 PO) DE 18 V TALADRO DESTORNILLADOR COMPACTO DE 13 mm (. PULG.) Y 18 V TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE REDUIRE LE RISQUE DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OPERADOR. GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow the warnings and instructions may result in electric shock, fire and/orserious injury. Save all warnings and instructions for future reference.The term "power tool" in the warnings refers to your mains-operated (corded) power tool orbattery-operated (cordless) power tool. GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow the warnings and instructions may result in electric shock, fire and/orserious injury. Save all warnings and instructions for future reference.The term "power tool" in the warnings refers to your mains-operated (corded) power tool orbattery-operated (cordless) power tool. • Keep work area clean and well lit. Cluttered or attached to a rotating part of the power tool may dark areas invite accidents. result in personal injury. • Do not operate power tools in explosive atmo• Do not overreach. Keep proper footing and spheres, such as in the presence of flammable balance at all times. This enables better control liquids, gases or dust. Power tools create sparks of the power tool in unexpected situations. which may ignite the dust or fumes. • Dress properly. Do not wear loose clothing or • Keep children and bystanders away while jewellery. Keep your hair, clothing and gloves operating a power tool. Distractions can cause away from moving parts. Loose clothes, jewel- you to lose control. lery or long hair can be caught in moving parts. ELECTRICAL SAFETY • If devices are provided for the connection ofdust extraction and collection facilities, ensure • Power tool plugs must match the outlet. Never these are connected and properly used. Use of modify the plug in any way. Do not use any dust collection can reduce dust-related hazards. adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will POWER TOOL USE AND CARE reduce risk of electric shock. • Do not force the power tool. Use the correct • Avoid body contact with earthed or grounded power tool for your application. The correct surfaces such as pipes, radiators, ranges and power tool will do the job better and safer at the refrigerators. There is an increased risk of electric rate for which it was designed. shock if your body is earthed or grounded. • Do not use the power tool if the switch does not • Do not expose power tools to rain or wet conditurn it on and off. Any power tool that cannot be tions. Water entering a power tool will increase controlled with the switch is dangerous and must the risk of electric shock. be repaired. • Do not abuse the cord. Never use the cord for • Disconnect the plug from the power source carrying, pulling or unplugging the power tool. and/or the battery pack from the power tool Keep cord away from heat, oil, sharp edges before making any adjustments, changing or moving parts. Damaged or entangled cords accessories, or storing power tools. Such increase the risk of electric shock. preventive safety measures reduce the risk of • When operating a power tool outdoors, use an starting the power tool accidentally. extension cord suitable for outdoor use. Use • Store idle power tools out of the reach of chilof a cord suitable for outdoor use reduces the risk dren and do not allow persons unfamiliar with of electric shock. the power tool or these instructions to operate • If operating a power tool in a damp location the power tool. Power tools are dangerous in the is unavoidable, use a residual current device hands of untrained users. (RCD) protected supply. Use of an RCD reduces • Maintain power tools. Check for misalignment the risk of electric shock. or binding of moving parts, breakage of partsand any other condition that may affect the PERSONAL SAFETY power tool’s operation. If damaged, have the • Stay alert, watch what you are doing and use power tool repaired before use. Many accidents common sense when operating a power tool. Do are caused by poorly maintained power tools. not use a power tool while you are tired or under • Keep cutting tools sharp and clean. Properly the influence of drugs, alcohol or medication. A maintained cutting tools with sharp cutting edges moment of inattention while operating power are less likely to bind and are easier to control. may result in serious personal inj...