Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
If damaged, have replaced immediately by a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. ¦ Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. ¦ Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. ¦ To reduce the risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. ¦ Disconnect charger from power supply when not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. DANGER: RISK OF ELECTRIC SHOCK. DO NOT TOUCH UNINSULATED PORTION OF OUTPUT CONNECTOR OR UNINSULATED BATTERY TERMINAL. ¦ Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. 5 SYMBOLS SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type or a characteristic of current --Direct Current Type or a characteristic of current n0 No Load Speed Rotational speed, at no load Class II Construction Designates double-insulated construction tools .../min Revolutions or Reciprocation Per Minute Revolutions, strokes, surface speed, orbits etc. per minute Safety Alert Indicates danger, warning or caution. It means attention!!! Your safety is involved. Wet Conditions Alert Do not expose to rain or use in damp locations. The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. SAVE THESE INSTRUCTIONS 6 SPECIFICATIONS SPECIFICATIONS Motor (Screwdriver) 3.6 Volts DC Collet (Screwdriver) 1/4 in. (6.4 mm) No Load Speed (Screwdriver) 180 RPM Switch (Screwdriver) Reversible Maximum Torque (Screwdriver) 45 in. lbs. Charger Rating 120 Volts, 60 Hz, AC only Charge Time 10 hours UNPACKING INSTRUCTIONS Your screwdriver/flashlight combination has been shipped completely assembled. ¦ Carefully remove the screwdriver, flashlight, and accessories from the box. Make sure that all items listed in the packing list are included. ¦ Inspect the screwdriver/flashlight combination carefully to make sure no breakage or damage has occurred during shipping. ¦ Do not discard the packing material until you have carefully inspected and satisfactorily operated the tools. PACKING LIST Screwdriver Flashlight Bits (23-piece set) Bulb Cradle/Charger with bit storage Operator's Manual WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. 7 FEATURES FEATURES SWITCH Your flashlight has a conveniently located trigger switch. ANGLE ADJUSTMENT Your screwdriver and flashlight are both equipped with an angle adjustment feature that allows you to adjust the angle of the tools. BI-DIRECTIONAL ROTATION Your screwdriver has a conveniently located switch that allows you to easily change the direction of the bit rotation. TORQUE ADJUSTMENT You can easily adjust the torque of the screwdriver. The maximum torque is 45 lbs./in. ERGONOMIC DESIGN The design of your screwdriver and flashlight provides easy handling. T...