Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
DO NOT TOUCH THE CHUCK OR ANY FRONT METAL PARTS OF THE TOOL! Hold the tool only by the plastic handle to prevent electric shock in case you drill or drive into a “live” wire. 3) If the bit becomes jammed, immediately turn the main switch off to prevent an overload which can damage the battery pack or motor. Use reverse motion to loosen jammed bits. 4) Do not operate the reversing lever when the main switch is on. The battery will discharge rapidly and damage to the unit may occur. 5) During charging, the charger may become slightly warm. This is normal. Do not charge the battery for a long period. 6) Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning. 7) When storing or carrying the tool, set the reversing lever to the center (switch lock) position. 8) Do not strain the tool by holding the speed control trigger halfway (speed control mode) so that the motor stops. 9) Do not operate the speed selector switch (LOW-HIGH) while pulling on the speed control trigger. This can cause the rechargeable battery to wear quickly or damage the internal mechanism of the motor. < Changes or modifications not expressly approved by MATSUSHITA ELECTRIC WORKS, LTD. could void the user’s authority to operate the equipment. Main Unit EY6101 (12V) EY6100 (12V) EY6181 (9.6V) Battery Pack ïï —(1) rr= u n H -(H) © EY9103 (12V) © EY9101 (12V) (G) EY9006 (12V) EY9182 (9.6V) EY9086 (9.6V) Battery Charger -q— t=a rO- C=s (KK
Brocas e shuropopverty - EY6181 (349.39 kb)
Brocas e shuropopverty - EY6100 (349.39 kb)