Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 24. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 25. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning”section of this manual. Use of unauthorized parts or failure to follow maintenance instructionsmay create a risk of electric shock or injury. SPECIFIC SAFETY RULES 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Impact Wrench in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location. 2. Maintain labels and nameplates on the Impact Wrench. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 3. When using the Impact Wrench, always maintain a firm grip on the tool with both hands. 4. Do not use the Impact Wrench or Charger (48) if it has been dropped, damaged, left outdoors, or immersed in liquid. 5. Do not charge the Battery (30) when the temperature is below 50 degrees Fahrenheit or above 104 degrees Fahrenheit. 6. Do not shake, drop, or strike the Battery (30). 7. To avoid electrical shock, do not pull or carry the Charger (48) by its Power Cord or pull the Power Cord around sharp corners or edges. Do not unplug the SKU 94855 PAGE 5 Charger by pulling on the Power Cord. Keep the Power Cord away from heated surfaces. 8. To avoid electrical shock, do not handle the Charger (48), its Power Cord Plug, or the Impact Wrench with wet hands. 9. Keep the Handle of the Impact Wrench dry, clean, free from oil and grease. 10. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Impact Wrench. 11. Never leave the Charger (48) unattended when it is plugged into an electrical outlet. Make sure to unplug it from its electrical outlet before leaving. 12. Always turn off the Impact Wrench and unplug the Charger (48) from its electrical outlet before changing accessories or performing any inspection, maintenance, or cleaning procedures. 13. Always switch to a fresh Battery (30) when tool performance begins to diminish. Severe heat is most destructive to a Battery. The more heat generated, the faster the Battery loses power. A Battery that gets too hot can be permanently damaged. Never over-discharge a Battery by using the tool even after tool performance is decreasing. Never attempt to discharge a tool’s Battery by continuing to pull the tool’s trigger. When tool performance begins to diminish stop the tool, recharge the Battery, and use the fresh Battery for optimal performance. 14. Battery (30) leakage may occur under extreme usage or temperature conditions. If Battery fluid comes in contact with skin, wash with soap and water and rinse with lemon juice and vinegar. If the fluid comes into contact with the eyes, flush with water for several minutes and contact a doctor immediately. 15. Never burn the Battery, as it can explode in a fire. Do not charge the Impact Wrench if it has a leaking Battery. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery. 16. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code 25249.5, et seq.) SKU 94855 PAGE 6 GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS 1. Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure ...