Log:
Assessments - 2, GPA: 5 ( )

Instruções de Operação Black & Decker, Modelo 7127-04

Fabricante : Black & Decker
Arquivo Tamanho: 6.06 mb
Arquivo Nome :
Língua de Ensino: enfr
Ir para baixar



Facilidade de uso


Use enough pressure to keep drill biting, but do not push hard enough to stall motors To minimize stalling on breaking through the material, reduce pressure on drill and ease the bit through last part of hole. 6. Hold drill firmly to control the twisting action of the drill. 7. THE DRILL STALLS if it is being overloaded or improperly used. RELEASE TRIGGER IMMEDIATELY, remove drill bit from work, and determine cause of stalling. DO NOT CLICK TRIGGER OFF AND ON IN ATTEMPT TO START A STALLED DRILL. 8. Keep motor running when pulling bit back out of a drilled hole. This will help prevent jamming. CARE IN DRILLING Twist drills are brittle and will break if enough bending stress is applied. To avoid stress on the bit, try extending your index finger along the side of the drill-housing with your middle finger on the trigger. Remember — guide the tool, don’t force it! Should the tool become overheated, run it free of any load at maximum speed. The drill will cool faster by running it without load. DRILLING IN METAL Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry. The cutting lubricant that works best is sulphurized cutting oil. Aluminum is best drilled with kerosene. DRILLING IN WOOD Holes in wood can be made with the same twist drills used for metal. These bits may overheat unless pulled out frequently to clear chips from the flutes. For larger holes, use Power Drill Wood Bits with a shank size that will fit your drill’s chuck. Work that is apt to splinter should be backed up with a block of wood. Let up on the pressure just before the tip cuts through, this will give you a good clean hole. CLEANING & LUBRICATION Use only mild soap and a damp cloth to clean the tool. Many household cleaners contain chemicals which could seriously damage the plastic. Also, do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or similar products. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Self-lubricating bearings are used in the tool and periodic relubrication is not required. However, it is recommended that, once a year, you take or send the tool to B & D Service Centre for a thorough cleaning, inspection and lubrication of the gear case. IMPORTANT To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement), should be performed by Black & Decker Service Centres or other qualified service organizations, always using Black & Decker replacement parts. When servicing Double-Insulated Tools, it is extremely important that ONLY IDENTICAL REPLACEMENT PARTS BE USED and that REASSEMBLY OF TOOL IS IDENTICAL TO THE ORIGINAL ASSEMBLY. RAPID EXCHANGE HOME USE WARRANTY Black & Decker warrants this product for two years against defect in material and workmanship in normal residential use. This warranty does not cover damage resulting from negligent handling, misuse or lack of reasonable care. Please return the complete unit, transportation prepaid, to the seller for free replacement if the seller is a participating retailer in the Black & Decker rapid exchange program. (Proof of purchase may be required by the seller.) The unit may also be returned to a Black & Decker service centre or authorized service station for free replacement or repair at our option. This warranty does not apply to accessories. saw blades). Expendable original equipment such as sanding sheets, belts and discs and jig saw blades need not be returned. For kits and assortments only the basic power tool will be replaced. The sole remedy for breach of this warranty and the sole obligation of Black & Decker hereunder is the repair or replacement of the defective product at Black & Decker’s option. Black & Decker shall have no liability whatsoever at any time for any personal injury or property damages or for any special, indirect or consequential damages of any kind howsoever arising. This warranty is strictly limited to its terms and is in lieu of any kind and all other warranties and conditions, written or oral, whether express or implied. Note: This warranty and related provi...

Este manual também é adequado para os modelos :
Brocas e shuropopverty - 7004-04 (6.06 mb)
Brocas e shuropopverty - 7104-04 (6.06 mb)
Brocas e shuropopverty - 7190-04 (6.06 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias