Assessments - 4, GPA: 4 ( )

Fabricante : Bosch Arquivo Tamanho: 294.71 kb Arquivo Nome : Língua de Ensino:

Standards by Underwriters Laboratories. -5 This symbol designates that this tool complies to NOM Mexican Standards. BM 3609929656 10/03 10/17/03 12:13 PM Page 6 Functional Description and Specifications !WARNING Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally. Drivers LOCKING BELT CLIP VENTILATION OPENINGS BIT TIP .LOCK-ON. BUTTON NOSE PIECE RING VENTILATION OPENINGS REVERSING SWITCH LEVER TRIGGER SWITCH LOCKING BELT CLIP BIT TIP OPENINGS .LOCK-ON. BUTTON VENTILATION VENTILATION OPENINGS VENTILATION OPENINGS TRIGGER SWITCH NOSE PIECE RING NOTE: For tool specifications refer to the nameplate on your tool. -6 BM 3609929656 10/03 10/17/03 12:13 PM Page 7 Operating Instructionw VARIABLE SPEED CONTROLLEH TRIGGER SWITCL Your tool is equipped with a variable speed trigger switch. The tool can be turned "ON" or "OFF" by squeezing or releasing the trigger. The speed can be adjusted from the minimum to maximum nameplate RPM by the pressure you apply to the trigger. Apply more pressure to increase the speed and release pressure to decrease speed. "LOCK-ON" BUTTON The "Lock-ON" button, located near the trigger allows for continuous operation at maximum RPM without holding the trigger. TO LOCK TRIGGER "ON": squeeze trigger, depress button and release trigger. TO UNLOCK THE TRIGGER: squeeze trigger and release it without depressing the "Lock- ON" button. !WARNING If the “Lock-ON” button is continuously being depressed, the trigger can not be released. REVERSING SWITCH LEVER The reversing switch lever is located above the trigger switch and is used to reverse rotation of the bit. To use driver in "Forward" rotation, move lever to left side of tool. To "Reverse" the rotation of the bit move the lever to the right side of the tool. The center position of the lever is the "Lock-OFF" position. !CAUTION Do not change direction of rotation until the tool comes to a complete stop. Shifting during rotation of the chuck can cause damage to the tool. BELT CLIP Your tool is equipped with a belt clip that allows you to conveniently attach your driver to your belt. This feature will allow you to have both hands free when climbing a ladder or moving to another work area. Tool Tipw 1. Support the tool so that steady, even pressure is applied to the screwdriving bit. Operate the trigger switch by depressing with one or two fingers. 2. Lock the tool on for continuous operation. The bit will not rotate until the clutch is engaged. 3. Place a drywall screw on the bit. The magnetic bit holder will hold any steel drywall screw without any additional assistance. 4. Press the screw point against the drywall with steady even pressure. At this point, the clutch will engage, driving the screw to the pre-set depth. Once the screw bottoms out, a ratcheting sound will be heard for a second. 5. When properly set, the screw head should pull into the dry...

Baixe o seu

Para fazer o download, introduza 2 dígitos :