Quik-Lok® Cord Sets 10' Quik-Lok® Cord Cat. No. 48-76-5010 25' Quik-Lok® Cord Cat. No. 48-76-5025 Select Models: Blade Clamp Cat. No. 42-68-0682 Blade Clamp Screw Cat. No. 06-83-2975 “787” Blades: Blade Clamp Cat. No. 42-68-0685 Blade Clamp Screw Cat. No. 06-83-2975 See Pages 24, 25 & 26 for a listing of Super Sawzall® Blades. Clean dust and debris from vents. Keep the tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your tool since certain cleaning

• Never attempt to drive fasteners into hard surfaces such as steel, concrete, or tile. • Take care to avoid driving a fastener on top of another fastener. • Position tool carefully so that fasteners will be delivered to the proper location. 3- ENG . HAZARD RISK OF INJURY (continued) WHAT COULD HAPPEN HOW TO PREVENT IT • • Improperly maintained tools and accessories can cause serious injury. Use only accessories identified by the manufacturer to be used with specific tools. There is a risk of bu

There is an increased risk of electric shock if your body is grounded. • Thoroughly investigate the workpiece for possible hidden wiring before performing work. HAZARD RISK OF ENTANGLEMENT WHAT COULD HAPPEN HOW TO PREVENT IT • Tools which contain moving elements, or drive other moving tools, such as grinding wheels, sockets, sanding discs, etc. can become entangled in hair, clothing, jewelry and other loose objects, resulting in severe injury. • Never wear loose fitting clothes, or apparel which

IMPORTANTE Asegurese de que la persona que va a usar esta herramienta lea cuidadosamente y comprenda estas instrucciones antes de empezar a operarla. IMPORTANT Veuillez vous assurer que la personne qui utilise cet outil lit attentivement et comprend ces instructions avant de commencer a utiliser l'outil. Part No. D22727-028-4 SAFETY GUIDELINES - DEFINITIONS This manual contains indicates an imminently hazardous situation which, if not information that is avoided, will result in death or serious

MK Diamond Products may act as a warranty station for the motor/engine repairs based on individual agreement with the manufacturer. This warranty is in lieu of all other warranties expressed or implied. MANTA I COMBO EXPLODED VIEW AND PARTS LIST EXPLODED VIEW MANTA EXPLODED VIEW (cont...) MANTA EXPLODED VIEW (cont...) MANTA EXPLODED VIEW (cont...) MANTA PARTS LIST PARTS LIST: Item Description Qty MK p/n A Assembly, M1 Base, Vacuum 1 n/a A1 Base, M1 Vacuum 1 155753 A2 Screw, 1.2-13 x 3 1.2 Hex Hd

Low gear. Selector No RPM Cutter Dia. Selector No RPM Cutter Dia. 1 300 32 1 150 62 2 360 26 2 180 52 3 430 22 3 215 46 4 500 19 4 250 38 5 600 16 5 300 32 6 650 14 6 330 30 This data is presented for guidance only, and should be adjusted to suit site and material conditions. RLL233 Issue 4 Aug 2007 18 [14] REPLACEMENT OF MOTOR SUPPLY CABLE. TO REMOVE OLD CABLE AND CHAIN Ensure that the machine is disconnected from any source of power. Failure to do so may result in personal injury. • Remove scr

• Before operating the machine, always remove tie, rings, watches and any loose adornments which might entangle with the rotating machinery. • Should the cutter become 'fast' in the workpiece, stop the motor immediately to prevent personal injury. Disconnect from the power source and turn arbor to and fro. DO NOT ATTEMPT TO FREE THE CUTTER BY SWITCHING THE MOTOR ON AND OFF. • If the machine is accidentally dropped, always thoroughly examine the machine for signs of damage and check that it funct