Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Remove traces of limescale, grease, starch and albumin (e. g. egg white) immediately. Corrosion can form under such residues. Special stainless steel cleaning products suitable for hot surfaces are available from our after-sales service or from specialist retailers. Apply a very thin layer of the cleaning product with a soft cloth. Door panels Glass cleaner: Clean with a soft cloth. Do not use a glass scraper. Glass cover for the oven light Hot soapy water: Clean with a dish cloth. Seal Do not remove. Hot soapy water: Clean with a dish cloth. Do not scour. Rails Hot soapy water: Soak and clean with a dish cloth or brush. Telescopic shelves Hot soapy water: Clean with a dish cloth or a brush. Do not remove the lubricant while the pullout rails are pulled out – it is best to clean them when they are inserted. Do not soak or clean in the dishwasher. Accessories Hot soapy water: Soak and clean with a dish cloth or brush. Cleaning the self- cleaning surfaces in the cooking compartment The back wall and ceiling of the cooking compartment are coated with a highly porous ceramic layer. This coating absorbs and disintegrates splashes from baking and roasting while the oven is in operation. The higher the temperature and the longer the oven is in operation, the better the result will be. If splashes are still visible even after repeated use, proceed as follows: 1. Clean the cooking compartment floor and side panels thoroughly. 2. Set : 3D hot air. 3. With the door closed, heat up the empty oven for approximately 2 hours at maximum temperature. The ceramic coating is regenerated. When the cooking compartment has cooled down, remove the brown or white residue with water and a soft sponge. Light discolouration of the coating does not affect automatic self- cleaning. Caution! ¦ Never use abrasive cleaning agents. You will scratch or destroy the highly porous coating. ¦ Never treat the ceramic coating with oven cleaner. If oven cleaner accidentally gets onto it, remove it immediately with a sponge and plenty of water. Cleaning the cooking compartment floor and side walls Use a dish cloth and hot soapy water or a vinegar solution. If there are heavy deposits of dirt, use a stainless steel scouring pad or oven cleaner. Only use when the cooking compartment is cold. Never treat the self-cleaning surfaces with a scouring pad or oven cleaner. Detaching and refitting the rails The rails can be removed for cleaning. The oven must have cooled down. Detaching the rails 1. Lift up the front of the rail 2. and unhook it ( figure A) . 3. Then pull the whole rail forward 4. and remove it (Fig. B) . Clean the rails with cleaning agent and a sponge. For stubborn deposits of dirt, use a brush. 13 Refitting the rails 1. First insert the rail into the rear socket, press it to the back slightly (figure A), 2. and then hook it into the front socket (figure B). The rails fit both the left and right sides. Ensure that, as shown in figure B, levels 1 and 2 are below and levels 3, 4 and 5 are above. Detaching and attaching the oven door For cleaning purposes and to remove the door panels, you can detach the oven door. The oven door hinges each have a locking lever. When the locking levers are closed (figure A), the oven door is secured in place. It cannot be detached. When the locking levers are open in order to detach the oven door (Fig. B), the hinges are locked. They cannot snap shut. : Risk of injury! Whenever the hinges are not locked, they snap shut with great force. Ensure that the locking levers are always fully closed or, when detaching the oven door, fully open. Detaching the door 1.Open the oven door fully. 2. Fold up the two locking levers on the left and right (figure A). 3.Close the oven door as far as the limit stop. With both hands, grip the door on the left and right-hand sides. Close the door a little further and pull it out (figure B). Attaching the door Reattach the oven door in the reverse sequence to removal. 1.When attaching the oven door, ensure that both hinges are inserted straight into the opening (figure A). 2. The notch on the hinge must engage on both sides (figure B). 3. Fold back both locking levers (figure C). Close the oven door. : Risk of injury! If the oven door falls out accidentally or a hinge snaps shut, do not reach into the hinge. Call the aftersales service. Removing and installing the door panels To facilitate cleaning, you can remove the glass panels from the oven door. Removal 1. Detach the oven door and lay it on a cloth with the handle facing down. 2. Pull off the cover at the top of the oven door. Press in the tabs on the left and right using your fingers (fig. A). 3. Lift the top panel up and pull it out (fig. B). 4. Lift the panel up and pull it out (fig. C). Clean the panels with glass cleaner and a soft cloth. : Risk of injury! Scratched glass in the appliance door may develop into a crack. Do not use a glass scraper, sharp or abrasive cleaning aids or detergents. Installation Duri...