Assessments - 0, GPA: 0 ( )

Fabricante : Bosch Arquivo Tamanho: 3.3 mb Arquivo Nome : Língua de Ensino:

5. Gently twist the flat blade screw driver to loosen the glass lens cover. 6. Remove the glass lens cover and fixing clip. 7. Remove the bulb by grasping and sliding the bulb straight out until the two prongs have cleared the ceramic holder. 8. Do not touch the glass of the new replacement bulb with your fingers. It will cause the bulb to fail when it first lights. Grasp the replacement bulb with a clean paper towel or facial tissue with the prongs facing down. Locate the two prongs in the ceramic holder, gently poking until the two prongs locate in the ceramic socket. 9. Press in to seat the bulb. 10. Slide the protective lens into the holder clip and push the other end until the fixing clip snaps back into the housing. 11. Turn on circuit breaker. Lens 10W Halogen Lamp Fixing Clip Housing Ceramic Holder Holder Clip English 23 To replace the halogen bulb on the oven ceiling: To remove the oven door: 1. Turn off power to the oven at the main power supply (fuse or breaker box). 2. Remove the glass cover by unscrewing it. 3. Remove the halogen bulb and replace. Grasp the new bulb with a clean, dry cloth. 4. Screw the glass cover back on. 5. Turn power back on at the main power supply (fuse or breaker box). Removing the Oven Door CAUTION: When removing the door: • Make sure oven is cool and power to the oven has been turned off before removing the door. Failure to do so could result in electrical shock or burns. • The oven door is heavy and fragile. Use both hands to remove the oven door. The door front is glass. Handle carefully to avoid breaking. • Grasp only the sides of the oven door. Do not grasp the handle as it may swing in your hand and cause damage or injury. • Failure to grasp the oven door firmly and properly could result in personal injury or product damage. • To avoid injury from hinge bracket snapping closed, be sure that both levers are securely in place before removing the door. Also, do not force door open or closed - the hinge could be damaged and injury could result. • Do not lay removed door on sharp or pointed objects as this could break the glass. Lay on a flat, smooth surface, positioned so that the door cannot fall over. To replace the oven door: 1. Be sure to read the above CAUTION before attempting to remove the door. 2. Open the door completely. 3. Flip levers on hinges toward you. 4. Holding the door firmly on both sides and using both hands, close the door gently until it stops against the levers, about 30. from the closed position. 5. Carefully lift the door up and out of the hinge slots. Hold firmly; the door is heavy. 6. Place the door in a convenient and stable location for cleaning. 1. Hold the door firmly in both hands. 2. Hold the door at a 30. angle from the closed position and insert hinges into the slots. You may need to rock the door forward and backward slightly to seat the hinge feet. 3. The door may need to be removed and reinserted until the hinges sit correctly in the slots. 4. Open door all the way to expose hinges, levers, and slots. 5. Push levers forward and down until seated on the bracket. 6. Close and open door slowly to be sure it is correctly and securely in place. Door must be straight, not crooked. English 23 Service Before Calling Service Troubleshooting Chart Oven Problem Possible Causes and Suggested Solutions Oven door is locked and will not open, even after cooling. Turn the oven off at the circuit breaker and wait five minutes. Turn breaker back on. The oven should reset itself and will be operable. Oven is not heating. Check circuit breaker or fuse box to your house. Make sure there is proper electrical power to the oven. Be sure oven temperature has be...

Baixe o seu

Para fazer o download, introduza 2 dígitos :