Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Do not use the self-clean mode to clean the racks. CAUTION: To avoid burns, place oven racks in desired positions before turning oven on. Always use oven mitts when the oven is warm. If a rack must be moved while the oven is hot, do not let oven mitts contact hot heating elements. To avoid possible injury or damage to the appliance, ensure rack is installed exactly per installation instructions and not backwards or upside down. Note (for Professional Models POD301, PODC302, PODM301, PODMW301): Do not use oven with telescopic rack inserted in rack position 0 (lowest position, see figure below). Always use the flat rack in this position. Telescopic Rack 1. Hold the rack on a slight angle. Flat Rack Do not use the self-clean mode to clean the racks. 0 1 2 3 4 5 6 2. Engage the rear hooks in the accessory brackets. 3. Hold the rack straight. 4. Push the rack in until it is even with the front hooks. 5. Lift the rack up. 6. Push the rack in completely. 7. Engage the rack’s front hooks in the accessory brackets. This is very important to ensure that the rack is installed correctly (see the enlarged picture). English 1 Flat Rack The rack has a feature to prevent it from coming completely out of the oven. 1. Grasp rack firmly on both sides. 2. Insert rack (see picture). 3. Tilt rack up to allow stop into rack guide. 4. Bring rack to a horizontal position and push the rest of the way in. Rack should be straight and flat, not crooked. Cleaning and Maintenance Wash with hot soapy water. Rinse thoroughly and dry, or gently rub with cleansing powder or soap-filled pads as directed. Avoid getting cleansing powder in the telescopic slides. Relubrication may become necessary. Use only high-temperature food-grade lubricants to re-lubricate slides. Do not use the self-clean mode to clean the racks. Questions? 1-800-735-4328 We look forward to hearing from you! English 2 Accessoires Grille telescopique Cette grille facilite l'acces au four, ainsi que l'introduction et le retrait de plats. Ne pas nettoyer dans le four autonettoyant. Remarque (modeles Professional POD301, PODC302, PODM301, PODMW301) : N’utilisez pas le four avec une etagere coulissante a la position d’etagere 0 (voir le schema ci-dessous). Utilisez toujours une grille plate a cette position. 0 1 2 3 4 5 6 Grille plate Ne pas nettoyer dans le four autonettoyant. Mise en place les grilles dans le four : CAUTION : Pour eviter les brulures, placer les grilles dans la position desiree avant de mettre le four en marche. Toujours utiliser des gants isolants lorsque le four est chaud. Si une grille doit etre deplacee pendant que le four est chaud, ne pas laisser les gants isolants entrer en contact avec les elements chauffants. Pour eviter des dommages a l'appareil ou des blessures, s'assurer que la grille soit bien...
Este manual também é adequado para os modelos :Fornos - RACKKIT27S/01 (645.6 kb)
Fornos - RACKKIT30D/01 (645.6 kb)
Fornos - RACKKIT30S/01 (645.6 kb)