Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
1 Connect
2 Set up
3 Enjoy
Start with the ‘Basic Connection.’
If you have a VCR, follow the instructions for ‘Connection with a VCR or similar device’.
Basic Connection
Connection with a VCR
A
Finding the viewing channel
B
Initial Installation
About the Time Shift Buffer
Instant Replay
A
Before Connecting
or similar device
A Press SETUP
on the remote control.
Philips recorder (front panel)
(TSB)
While watching a live TV program, you can press left
to jump back 10 seconds upon every single press for
Unplug the antenna cable that is currently connected
A
Before Connecting
SETUP MENU - GENERAL
Once you switch on this recorder, the currently
instant replay.
to your TV.
Your new Philips recorder replaces the VCR for your
selected TV program will be stored in a temporary
Auto Chapter Marker
5min.
To return to live broadcast, press and hold right .
recording needs. First, unplug all the connections from
storage called the ‘TSB’ (Time Shift Buffer). The TSB
Record Quality
SP
your VCR.
A
can store up to 6 hours of recordings temporarily.
Press STANDBY-ON on the recorder
Auto Program
Search
B Turn on the TV.
Press DISPLAY
once to display the Time
Start Recording
B
Connecting
B
Connecting
Manual Program
Edit
Shift video bar.
Note If connected to your VCR, make sure it is
switched off or in standby mode before proceeding.
A
Before recording to hard disk
Television (rear)
C
(The TSB in playback mode)
Press SETUP
.
Start time
Shows TV channel or
You can preset the recording quality for content
R
L
D Press ‘0’ on the TV’s remote control, then press
of program
video input source
recorded to the time shift buffer.
R
R
Television (rear)
the Channel Down button repeatedly until you see
A
the { SETUP MENU - GENERAL } page. This is
B Setup and install TV channels.
CH003
Press SETUP
on the remote control.
the correct viewing channel for the recorder.
Highlight
and press right .
B Highlight
and press right .
Press down
repeatedly until you highlight
Press down
repeatedly until you highlight
{ Auto Program - Search } and press OK
.
{ Record Quality } and press right .
SETUP MENU - GENERAL
Auto Chapter Marker
5min.
A warning message will appear.
C Use up / down keys to select the preferred
Record Quality
SP
Auto Program
Search
Select
OK OK
and press OK
to proceed.
mode of recording quality and press OK
to
Manual Program
Edit
To AC
03:15:36 AM
confirm.
Highlight { Tuner Input Source }, press
09:15:36 AM
Philips recorder
To exit, press [SETUP].
power
right and select a suitable setting:
Record Quality
Hours of Recording
08:30:45 AM
(rear)
that can be stored
160GB Hard Disk
Philips recorder
{
Cable } – if the recorder is connected via a
HQ High Quality
34
VIDEO (CVBS)
VIDEO (CVBS)
PR
COMPONENT
Y
INPUT
OUTPUT
EXT 1
DVD RECORDER 22F8
VIDEO
L
OUT 1
L
L
R P
To
R
TV-OUT
ANTENNA-IN
LISTED
SP Standard Play
68
R
Complies with 21 CFR
OUT 2
R
R
(rear)
1040.10 and 1040.11
~
MAINS
cable/satellite
box.
EXT 2
COAXIAL
PB
Program stored
S-VIDEO (Y/C)
AUDIO
S-VIDEO (Y/C)
(DIGITAL AUDIO)
OUT 3
AUDIO
antenna
TSB Time of current
SPP Standard Play Plus
85
VIDEO (CVBS)
VIDEO (CVBS)
PR
COMPONENT
Y
INPUT
OUTPUT
EXT 1
{
Air } – if the recorder is connected directly
in TSB
DVD RECORDER 22F8
VIDEO
LP Long Play
102
L
OUT 1
L
L
status icon
R P
or set-
Note You may press the AV or SELECT button on
screen playback
R
TV-OUT
ANTENNA-IN
LISTED
To antenna
R
Complies with 21 CFR
OUT 2
R
R
EP Extended Play
136
1040.10 and 1040.11
to the antenna wall outlet.
in playback
EXT 2
COAXIAL
PB
top box
the TV’s remote control (if available) to select the
S-VIDEO (Y/C)
AUDIO
S-VIDEO (Y/C)
(DIGITAL AUDIO)
OUT 3
AUDIO
Current
SLP Super Long Play
200
or set-top box
correct viewing channel. See your TV’s user manual.
Select
OK
CONTINUE and press OK
to start
time
SEP Super Extended Play
270
VIDEO (CVBS)
P
To AC
R
COMPONENT
Y
OUTPUT
VIDEO
Values are estimates only. Parts of the HDD storage will be
L
OUT 1
power
automatic TV channel search.
The contents on the time shift buffer will be erased
reserved for the operations of this recorder and time shifting.
VIDEO
OUT
Note If no channels were found, check the
OUT 2
L
R
AUDIO
once you press P + / - or if you switch to
OUT
R
B
Record to hard disk
COAXIAL
P
antenna connection and start the channel search
B
S-VIDEO (Y/C)
(DIGITAL AUDIO)
AUDIO
OUT 3
another mode: SOURCE
,
VCR or similar device
again.
USB/DV
, DVD REC
.
A Press TUNER
to switch to tuner mode.
(rear)
C Select the language.
B Press P + / - to go to the TV program channel
Highlight
and press right .
PAUSE LIVE TV
you wish to record.
A Connect the antenna cable to the
A Follow the steps 1 to 5 of ‘Connecting’ under
–
select the System Language
C Press DISPLAY
to display the time shift
ANTENNA-IN
jack on the recorder.
‘Basic Connections’ to connect the recorder
–
select the Audio Language for DVD
Pause ‘live’ TV
video bar.
disc
playback.
B Use the supplied RF coaxial cable to connect the
before you proceed to step 2 below.
–
select the Subtitle Language for DVD disc
At times, you may be interrupted while
03:15:36 AM
09:15:36 AM
TV-OUT
jack on this recorder to the
B Use a yellow video cable (not supplied) to
playback.
watching your favourite program. Now you can
Antenna In jack on the TV.
connect the VIDEO (CVBS) EXT 1 jack on
LIVE
–
select the Disc Menu Language for DVD disc
PAUSE it, as if you were in control of the
C Use the supplied audio/video cable (yellow plug)
this recorder to the yellow VIDEO OUT jack on
playback.
broadcast.
Note To record from a connected external device,
to connect the VIDEO (CVBS) – OUT1
the VCR.
D Set the date and time
press
SOURCE
repeatedly to cycle through
jack on this recorder to the VIDEO IN jack on
C Use another red and white audio cable (not
video input sources from:
Highlight
and press right .
A Press PAUSE LIVE TV
while
the TV.
supplied) to connect the AUDIO L/R INPUT
{ CAM 1 } : VIDEO jack on the front
watching any live TV program to suspend it.
D
Highlight { Date-Time Setting } and press
{ CAM 2 } : S-VIDEO jack on the front
Use the supplied audio/video cable (red/ white
jacks on this recorder to the red and white
right . Select { Auto } and press OK
.
B Press PAUSE LIVE TV
to continue.
{ EXT 1 } : VIDEO (CVBS) EXT1 jack on the back
plugs) to connect the AUDIO L/R OUTPUT
AUDIO OUT jacks on the VCR.
A warning message will appear.
{ EXT 2 } : S-VIDEO (Y/C) EXT2 jack on the back
jack on this recorder to the AUDIO IN jacks on
C To return to live broadcast, press and hold
D Connect the power cable from your VCR to an
Select
OK OK
and press OK
to
the TV.
right .
or Press USB/DV
to record from a DV
AC power outlet.
proceed.
camcorder connected via the DV IN jack on the
E Connect the power cable from the recorder to
Note In this setup, the VCR cannot record TV
The date and time settings will follow
To jump forward playback, press right once for
recorder.
an AC power outlet.
programs.
broadcast channel information of Program
every 30 seconds.
D Press REC
to start recording.
Number
1.
For additional connection diagrams, see the
Note Press REC
repeatedly to extend 30
accompanying User Manual.
E Press SETUP
to finish the installation.
minutes increments per single press.
Your Philips recorder is now ready for use!
E To stop recording, press STOP
.