PET723-Eng_QSG.qxd 2008.4.11 10:40 Page 1 Philips Portable DVD Player PET723 Quick start guide 1 Charge your battery 2 Enjoy (Disc operation) 2 Enjoy (AV OUT) This portable DVD player is designed with a Connecting additional equipment (TV for built-in lithium battery to supply power to the example) player when you are on travel. 1 Connect the AV OUT socket on the set to the 1 Slide the POWER switch to the OFF position video and audio sockets on a TV as shown (charging of the DVD player only possible in directly. the power-off mode). 2 Switch on the TV and set to the correct video- in channel. ➜ You can consult the owner's manual of your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.) 2 Connect the supplied power adaptor cord (or 1 Slide the POWER switch to ON to switch on the car adaptor) to the player and AC mains the DVD player. (or the car cigarette lighter outlet) to start ➜ The POWER indicator turns on. TV charging. 2 Gently push the front panel as shown to open White ➜ The CHG indicator turns red. the disc compartment. Not supplied AUDIO IN Red ➜ When the battery is fully charged, the 3 Remove the protective card (if any) and load a Yellow VIDEO IN indicator turns off. disc with the label side facing up. 3 Disconnect the power adaptor cord (or the 4 Pull the front panel back to close the disc car adaptor) when the CHG indicator turns compartment. Playback will start automatically. off. If not, press 2;. 5 To stop playback, press 9. Notes: – You can also connect the supplied power adaptor Note: cord (or the car adaptor) to the player and AC – Once the battery is fully discharged, immediately mains (or the car cigarette lighter outlet) directly recharge it (regardless of whether you plan to use the battery or not) in order to maximize the wherever possible. battery life.When the power is low, the battery icon will be shown on the upper-right corner of the TFT for warning. Printed in China WK810