Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
These folders can have any name up to 10 characters in length. To name the folders it is first necessary to enter DD Drive mode and mount the DR-HD100 to a computer. Placing a Clip in a Reel From the Reels screen, choose the Reels as follows: Step 1: From the Utilities screen, go to Reels screen. Values include: •FA R0-0 Default Value • FA R0-0 through R9-9 “Reel Name” Step 2: Select a reel from the list. When selecting a REEL from this screen, the current track is marked with that REEL number. This can be done in any mode: record, stop, or playback. Each of the function keys can be set to specific reel, making it possible to quickly switch between multiple reels: a total of three reels being the maximum. Refer to “Functions Screen” on page 70 for more information. ProHD DR-HD100 Portable DTE Recorder Using a Wired Remote Control When using the optional wired remote control, use the button pad numbered 0-9 to mark the clips. Any additional button presses during a recording or playback, changes the selected REEL. Once a session is finished, select ORGANIZE REEL in Utilities screen. The marked clips are placed in the REEL in sequential order. When a reel is selected, the Home screen menu displays the reel’s name on the left side of the second to the last line of the screen, refer to “LOCAL” on page 89. Optional Wired Remote Control (p/n ACSS-0019-01) To order the Wired Remote Control, go to Focus Enhancements website, ProHD DR-HD100 Portable DTE Recorder DR-HD100 Functions Play Screen PLAY PLAY CLIP LOOP CLIP LOOP ALL PLAY ALL • Play Clip In this mode, the DR-HD100 plays the selected clip from start to finish when you press the PLAY button. At the end of the particular clip, the DR-HD100 pauses. • Loop Clip In this mode, the DR-HD100 plays the selected clip from start to finish. Immediately after completing the clip, the DRHD100 begins playing the clip again without a pause. It stays in this state until stopped. • Loop All In this mode, the DR-HD100 plays the entire contents of the disk (all clips), in order, from start to finish. At the end of the last clip, the DR-HD100 begins to play from the beginning of the first clip again without a pause. It stays in this state until stopped. • Play All In this mode, the DR-HD100 plays the entire contents of the disk (all clips) in order, from start to finish. At the end of the last clip, the DR-HD100 pauses. ProHD DR-HD100 Portable DTE Recorder DR-HD100 Functions Play From Screen PLAY FROM TRACK LIST REEL LIST This screen permits the selection of from where clips playback. There are two choices: • Track List Clips playback in the order in which they were recorded. Playback order is based on the order of the file names. • Reel List Clips in a selected folder are played back. This function provides the ability to choose between any folders on the disk. Folders can appear with their user assigned folder name (if used). ProHD DR-HD100 Portable DTE Recorder DR-HD100 Functions Control Screen CONTROL LOCAL -JVC GY-HD SYNCRO SLAVE AV/C The Control screen provides the capability of enabling the DRHD100 to operate in five different control modes during record and playback. • LOCAL Local control mode ignores record triggers from the camcorder and is controlled exclusively from the DR-HD100 front panel or the optional wired remote control unit. STOP 1-001 COUNTER 00:00:00:00: DISK 1 000 min R1 SYNC DISP LOCK 0-9 REEL numbers TransportKeys Keeper(cycles throughReels) • Transport keys have the same functions as on the DR-HD100. ProHD DR-HD100 Portable DTE Recorder DR-HD100 Functions • Use the Keeper key to cycle through the available Reels. For example, if the current Reel selection is 3. pressing Keeper changes the selection to Reel 4. To purchase the wired remote control, p/n ACSS-0019-01, for the DR-HD100, visit Focus Enhancements web site at • JVC GY-HD The JVC GY-HD control setting is the preferred mode when using the companion GY-HD100/101 camcorder. See page 30 for more information about using the JVC GY-HD control mode. • Syncro Slave Use this mode when the camcorder does not have DR-HD100 compatible external control or the tapeless trigger functionality. In Syncro Slave control mode, the DR-HD100 mimics the camcorder’s operations by monitoring the camcorder’s tape record state. • AV/C Do Not Use AV/C control in Record Mode Use AV/C in playback mode and other situations where the DR-HD100 is controlled by an external FireWire device such as a NLE system that is not supported by Direct To Edit Technology. In these cases, the DR-HD100 can be used in a manner similar to a camcorder to capture footage to the NLE • External The External Control mode allows the DR-HD100 to be controlled from a camcorder other than the JVC GY-HD100/ 101, if it features a DR-HD100 compatible external control setting separate from the tape transport. Camcorder Requirements for External Control Mode External Control mode will not work un...