Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
. Any other discs without compatibility indications Precautions –5– EN Setup Connections Connection to a TV If your TV has AUDIO/VIDEO input jacks, see the following instructions. Method 1 Method 2 Basic Audio Good picture Better picture TV (INPUT) L R AUDIO IN VIDEO IN S-Video Video Audio cable cable cable (supplied) or (commercially (supplied) available) S-VIDEO IN Setup S-VIDEOOUT VIDEOOUT AUDIO OUT DIGITAL AUDIO OUTCOAXIAL LRAUDIO OUTLR TOSPEAKER(Analog) AUDIO OUT This unit (OUTPUT) S-VIDEO OUT VIDEOOUT VIDEO OUT S-VIDEO OUT Hint • Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system. After you have completed connections • Hit the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompanying your TV. INPUT MODES FOR COMMON TV BRANDS (Example) • Listed below are inputs for common brand name TV’s. Admiral: AUX Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93 GE: INPUT, TV/VCR, 00, 90, 91, 92, 93 Hitachi: INPUT, AUX JVC: A/V CHANNEL, INPUT1, SVIDEO, INPUT2 Kenwood: AUX LXI-Series: 00 Magnavox: AUX CHANNEL Panasonic: TV/VIDEO RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93 Samsung: TV/VIDEO Sanyo: VIDEO Sharp: 00 Sony: VIDEO1, VIDEO2, VIDEO3 Toshiba: TV/GAME Zenith: 00 RF Modulator Connection If your TV has Antenna in jack only, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF Modulator (commercially available). In this case, follow the instructions below. 1) Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF Modulator by audio and video cables. 2) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to your RF Modulator (usually marked “ANT IN”). 3) Connect your RF modulator to your TV by another RF cable. 4) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual. S-VIDEOOUT VIDEOOUT AUDIO OUT DIGITAL AUDIO OUTCOAXIAL LRStereo Audio/Video RF Modulator (commercially available) TO TVCHANNEL VIDEO AUDIO R L3 4 ANT INAC 120V (Back of TV) Audio/Video Cables (Supplied) (Back of this unit) RF Cable (Not supplied) AntennaCable Signal 321Antenna in jack 5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.For more details, follow the instructions supplied with the RF Modulator. Hint HintHint • The quality of picture may become poor if the unit is connected to an RF Modulator. –6– EN Connection to an Audio System Method 1 Function Overview for Speaker Speaker Speaker To (Right) 1 3 2 4 AUDIO This unit HintHint • When using the supplied speakers, connect the speakers' AC adapter to the out- let and turn on the power of the supplied speakers. • The volume of the supplied speakers can be adjusted. Adjust the volume using the volume knob of the right side unit. FROM RIGHT SPEAKER IMPEDANCE 4.AC 10V 8VA AC INPUT IMPEDANCE 4.TO LEFT SPEAKER FROM DVD S-VIDEOOUT VIDEOOUT AUDIO OUT DIGITAL AUDIO OUTCOAXIAL LR TOSPEAKER TOSPEAKER AC adapter (supplied) AC outlet(Left) (Right) Back side Back side Connect 1Connect 2Connect 3Plug in 4TO SPEAKER 1. POWER button To turn the speaker on or off. 2. POWER light Lights up when power is on. 3. INPUT jack You can connect to the audio out jack of other audio equipment or the headphone jack of a TV. SetupHintHint •You can remove the net from front panel of the speakers. 4. VOLUME knob To adjust volume. L R AUDIO OUTLR Stereo system DIGITAL AUDIO OUTCOAXIAL AXIAL AUDIO This unit Method 2 Digital audio input jack (Analog) AUDIO OUT DIGITAL Method 3 Audio cable (supplied) Audio Coaxial Digital cable (commercially available) Dolby Digital decoder, MD deck or DAT deck AUDIO This unit Analog audio input jacks SETUP > QUICK > DOLBY DIGITAL Setting Connection Connecting to Stereo System. PCM * To complete these settings, refer to pages 14-15. Hint HintHint • Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. BITSTREAM SETUP > QUICK >Setting Connection DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. PCMConnecting to the other equipment (an MD deck or DAT deck etc.) without Dolby Digital decoder. * To complete these settings, refer to pages 14-15. Hint HintHint • The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters. • Playing a DVD using inco...