Log:
Assessments - 2, GPA: 3.5 ( )

Instruções de Operação FUNAI, Modelo DP100HH8

Fabricante : FUNAI
Arquivo Tamanho: 4.94 mb
Arquivo Nome : 5e3ca551-faf2-4317-a138-9646246a5d3d.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


If RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system. If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture; You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to “ON” in “DISPLAY” menu, so that the P-SCAN indicator on the front panel lights up. Refer to pages 14-15 for more details. • When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all. If your TV is not compatible with progressive scanning; Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on the front of the unit for more than 5 seconds, so that the P-SCAN indicator on the front panel turns off. After connecting to your TV: You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX. Please refer to your TV’s manual for details. INPUT MODES FOR COMMON TV BRANDS Listed below are inputs for common brand name TV’s. Admiral: AUX Panasonic: TV/VIDEO Curtis Mathis: LINE1, LINE2, 00, 90, 91, 92, 93 RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93 GE: INPUT, TV/VCR, 00, 90, 91, 92, 93 Samsung: TV/VIDEO Hitachi: INPUT, AUX Sanyo: VIDEO JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3 Sharp: 00 Kenwood: AUX Sony: VIDEO1, VIDEO2, VIDEO3 LXI-Series: 00 Toshiba: TV/GAME Magnavox: AUX CHANNEL Zenith: 00 EN – 6 – Analog Audio Connection Digital Audio Connection Connection to an Audio System Analog Audio Connection Digital Audio Connection Connection to an Audio System Audio stereo system Dolby Digital decoder, COAXIAL COAXIAL DIGITAL AUDIO OUT L R AUDIO OUT R L analog audio input jacks AUDIO OUT DIGITAL AUDIO OUT RCA audio cable digital audio coaxial cable MD deck or DAT deck SETUP > AUDIO> DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to the other device (an MD deck or DAT deck etc.) without Dolby Digital decoder. PCM Connection Setting digital audio input jack This unit Note: • The audio source on a disc in a Dolby Digital multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi-channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. * To complete these settings, refer to pages 14-15. Rear Terminals 4 521 3 S-VIDEO OUT CR/PR CB/PB VIDEO OUT Y L R AUDIO OUT DIGITAL AUDIO OUT COMPONENT VIDEO OUT COAXIAL 1 2 3 4 5 S-VIDEO OUT jack Connect an optional S-video cable here through the S-video in jack of a television. COMPONENT VIDEO OUT jacks Connect optional component video cable here through the component video in jacks of a television. VIDEO OUT jack Connect a yellow video cable here through the video in jack of a television. AUDIO OUT jacks Connect an audio cable here through the audio in jacks of a television or other audio device. DIGITAL AUDIO OUT COAXIAL jack Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver. SETUP Note: • Please purchase the necessary cables at your local store. (Refer to pages 6-7.) EN – 7 – About the Remote Control SETUP Installing the Batteries for the Remote Control Remote Control STANDBY-ON AUDIO SUBTITLE ANGLE REPEAT CLEAR A-B PAUSE SETUP TOP MENU MENU ENTERMODE ZOOM RETURN SLOW SKIP OPEN/CLOSE DISPLAY SEARCH MODE 1 2 3 4 5 6 7 8 9 0 +10 PLAY REV FWD STOP Install batteries (AA x2) matching the polarity indicated inside battery compartment of the remote control. 2 31 Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the remote sensor on the unit. • The maximum operable ranges from the unit are as follows. -Line of sight: approx. 23 feet (7m) -Either side of the center: approx. 16 feet (5m) within 30° -Above: approx. 16 feet (5m) within 15° -Below: approx. 10 feet (3m) within 30° OPEN/CLOSE PLAY STOP POWER P-SCAN Note: • Do not mix alkaline and manganese batteries. • Do not mix old and new batteries. • Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. Button (Alphabetical order) Media 1 2 3 4 5 6 7 8 9 0 +10 • To select chapter or title directly. • To select track directly. (CD) • To select folder/file directly. (MP3) ENTER • To move the cursor and determine its position. • To move the cursor and determine its position. A-B • To repeat between your chosen point of A and B. • To repeat between your chosen point of A and B. ANGLE • To select camera angles on a disc. -----AUDIO • To select audio language on a disc. • To select...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias