Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Bose, Modelo Lifestyle 18 Series II

Fabricante : Bose
Arquivo Tamanho: 1.01 mb
Arquivo Nome : og_ls28_18_series2.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Stops the disc player. Note: For DVDs and VCDs only, the system remembers the point where the disc was stopped. Pressing again clears that memory. Pauses the disc player. Starts the disc player. Skip back or forward to the start of a track or chapter. Or, when pressed and held, scans back or forward through the current CD or MP3 disc, or adjusts the speed of the scan. Plays CD tracks in random order. Press Shuffle again to cancel this mode. Repeats a whole CD or track, DVD chapter, or DVD title. Press Repeat again to cancel the repeat mode. If the remote does not work as you expect If your system does not respond when you press a button on the remote, it could be time to change batteries. For information on the type of batteries to use and how to change them, refer to “Troubleshooting” on page 41. In some buildings, you may experience “dead spots” where the remote control will not operate effectively. If this happens, move the remote a foot or two and try again. Also make sure the cord that connects the power supply to the media center (and contains the remote antenna) is stretched to its full length. If these efforts do not work, move the media center a few feet to a location where it provides a better response. If the batteries are fine and the suggestions concerning “dead spots” above do not work, you may need an antenna extender. To contact Bose® customer service to request one, refer to the address list included with the system. English 9 10 Capabilities and Controls English The media center The CD/DVD tray and system controls are located under the front panel door of the media center. To the right of that is the display window (Figure 1). An IR signal emitter, located under the CD/DVD tray, enables you to control other components using the LIFESTYLE® remote. Avoid blocking the emitter, so its signal will have a clear path to other components or reflective surfaces in the room. Figure 1 Front view of the media center Controls The nine control buttons work as described below. ® Front panel door – lifts up Disc tray Controls Display window Headphone jack IR emitter On/Off Source Volume Enter Erase Store All Off Open/Close Turns the system on or off in the main room only. Selects the source last used when it turns the system on. Turns off the system and all connected speakers (in all rooms). Opens/closes the disc tray. Steps through the available source selections. Begins DVD play when that option appears selected on screen. Works with the Store button to scan through the system settings options on the media center display. Removes a radio station preset. Raises the volume of the system and unmutes the speakers (if they were muted). Lowers the volume of the system but does not unmute the source. Copies the tracks from an audio CD to the internal hard drive on the LIFESTYLE® 38 and 48 systems only. When the system is off, resets the remote control house code. Works with the Enter button to scan through the system settings options on the media center display. On/Off All Off Open/Close Source Enter Erase Volume Store Capabilities and Controls Capabilities and Controls Display window The media center display window indicates the state of the system, including what source is playing, details of that program, and what option, if any, is selected (Figure 2). When Settings menu items or messages appear in the display, they may scroll to reveal information that does not fit in the two lines available. Figure 2 Sample of information that appears on the media center display Light indicators Shuffle Shows when a CD, MP3 disc, or contents of an MP3 folder are playing in random order. Repeat Shows when the track or disc playing is set to repeat. Disc Shows when a disc in the CD/DVD tray is playing. Track Shows when a track is playing. Storing Shows when CD tracks are being copied to storage on LIFESTYLE® 38 or 48 systems only. Lights briefly when a remote control command is received. Activating component or progressive scan connections If you have used a component video connection between the media center and the TV, you need to activate settings for the connection, as explained below. With the media center turned off, use the controls on its front panel to follow these steps: 1. Press and hold the Enter button on the media center. 2. While holding the Enter button down, press the Store button. Selections will appear on the media center display each time you press Store. Move up and down using the Volume up and down buttons on the media center console. 3. When Video appears as the selection on the display, release the Store and Enter buttons. 4. Use the Volume up and down buttons to scroll through the Video options. 5. Stop scrolling at the proper selection. • For a component connection only, select: -NTSC COMPONENT (in North America) -PAL COMPONENT (outside North America) • For a component connection and progressive scan, select NTSC PROGRESSIVE. Note: The system does not support PAL progressive video. 6. With the pro...

Este manual também é adequado para os modelos :
DVD-player - Lifestyle 18 Series II (1.01 mb)
DVD-player - Lifestyle 28 (1.01 mb)
DVD-player - Lifestyle 28 (1.01 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias