Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
For more information, please see the “Setup > Audio Settings” section of this manual or refer to your amplifier’s documentation. Stereo (2-Channel) Audio Connection with Amplifier Surround (5.1-Channel) Audio Connection with Amplifier GETTING STARTED GETTING STARTED Remote Control • Refer to the diagram. Remove the battery compartment cover located on the rear of the remote control. Insert batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment. Replace the cover. • To use the remote, point it at the remote sensor of the player. Operate the remote within 15 feet of the sensor and at an angle of +/-60 degrees. • Batteries in the remote will last for approximately 1 year. Replace the batteries if the remote control does not work. Do not mix old with new batteries, or different types of batteries. • Remove the batteries from the remote if it will not be used for a long period of time. WARNING • The batteries used in the remote control may present a fire or chemical burn if mistreated. Do not recharge, disassemble, incinerate, or heat the battery (~2120F). • Keep batteries away from children. Power Supply This unit should be used with 100-240V 50/60Hz AC wall outlets, only. Caution: • Do not connect the power plug to a power outlet other than that which is indicated here and on the label as this may result in the risk of fire or electric shock. • Do not handle the power plug with wet hands. Doing so may cause electric shock. Page 1 Coby Electronics CorporationPage 1 Coby Electronics Corporation BASIC OPERATIONS BASIC OPERATIONS Basic Playback 1. Prepare the connections and power supply. Set the Power Switch to the ON position to turn the player on. 2. Load a disc. Press the Open/Close button to open the disc tray. Insert a disc with the label-side up. Press the Open/Close button again to close the disc tray. • If a single-sided disc is inserted upside-down, the player will display “NO DISC” or “BAD DISC”. 3. Start playback. Press PLAY to start playback (some discs may start playing automatically). Play/Pause/Stop • Press to play the disc for the first time. • Press during playback to pause. Press again to resume playback. • Press during playback to stop the disc (“Pre-Stop”). Press to resume playback at the time-point at which the disc was stopped. • Press when the disc is “Pre-Stopped” to stop playback completely. (When is pressed, the disc will start playing from the beginning.) Previous/Next (Skip) • Press to skip to the next track (DVD, CD, etc). • Press to return to the previous track (DVD, CD, etc). Forward/Reverse (Search) • Press and hold to fast forward through the current track. Continue holding to change the rate of forward playback. Normal x2 x4 x8 x16 x32 • Press and hold to reverse through the current track. Continue holding to change the rate of reverse playback. Normal x2 x4 x8 x16 x32 Slow • Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate of slow-motion playback. Press to resume normal playback. Normal x1/2 x1/4 x1/8 x1/16 x1/32 Press STEP frame-by-frame playback. Each successive press of STEP will advance the video one frame. Press to resume normal playback. Note: Audio will be muted during fast-forward, fast-reverse, and slow-motion playback. 1 Page 1 BASIC OPERATIONS BASIC OPERATIONS Menu Navigation To navigate DVD disc menus or the player’s setup menus: • Press the NAVIGATION keys (arrows) to select a desired feature or option in the menu. • Press ENTER to confirm a selection in the menu. • For some menu options, you may be able to use the numeric keypad to input data. • Press Clear to cancel an entry. Numeric Keypad • Use the numeric keypad to skip directly to a DVD chapter or CD track. (Some discs may not allow direct access function.) • Use the numeric keypad to input numeric data in menu option fields when possible. Adjusting the Volume • Press VOL+ or VOL- to adjust your player’s volume level output. Disc Error Messages The following messages will be displayed on-screen if there is a problem with the format of the loaded disc. • WRONG REGIONAL DISC. The region code of the disc does not match the player’s region code (Region 1). • WRONG PASSWORD. The parental rating level of the disc is higher than the parental rating level setting of the player. The player will not play the disc. • WRONG DISC. The player is equipped with automatic disc quality detection software. If the player detects a disc that is damaged or has a format problem, it may play the disc at a lower quality or stop play completely, depending on how damaged the disc is. • DTS Discs: This player does not have a built-in DTS decoder. • Connect to a digital amplifier using a Digital Audio Connection (optical or coaxial) to enjoy DTS audio discs. • Select Dolby 5.1 or 2-Channel Stereo Downmix instead of the DTS setting. Note: DVD disc production quality may vary; some discs may deviate from the industry s...