Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
It is designed to give you good value and many hours of listening enjoyment. Please read this manual carefully, as it should be able to answer many of your questions about the operation and features of this product. IMPORTANT NOTES Avoid installing unit in locations described below: -Places exposed to heat radiating appliances such as electric heaters -On top of other equipment that radiates heat -Places lacking ventilation or dusty places -Humid or moist places Features: -AM/FM Wallmount Stereo with DVD Player -Suspended Automotive DVD Deck Mechanism -Electronic Tuner -Locking Power / Speaker Connector -Clock /Alarm -2-Channel (Left, Right with A/B Speaker Outputs) -Auxiliary Input Function -Backlit Controls -Reverse Polarity Protection -50 Watts Power Output -12VDC -US/European Bands -Bass/Treble -Alarm Defeat Switch REAR PANEL FEATURES -External Fuse Holder -Main Wiring Pigtail with Locking Amp Connector (12-Pin) -Auxiliary Input Phone Jacks (Left and Right) Manual contents: Page: Features-Manual contents 1 Controls Identification 2-3 Operation Instructions 4-10 Hook Up Wiring Color Code 11 Installation/Specification 12 Warranty 13 1 Controls Identification: Controls Identification 1) Tuning Up / Seek / Minute Set Button 2) Tuning Down / Seek / Hour Set Button 3) Mute / AS/PS / Loud Buttons 4) Time Set Button 5) Display Window 6) Alarm Set / Alarm On/Off Buttons 7) Button Reset 8) Preset # 3 (Previous) / Preset # 4 (Next) 9) Preset # 5 (Menu) 10) Preset # 6 (Enter) 11) Preset # 1 (Play/Pause) / Preset # 2 (Stop) 12) DVD Player 13) Eject Button 14) Speaker Selector 15) 1/8” Auxiliary Input Jack 16) Stereo Headphone Jack 17) Audio Adjust Button 18) Power Switch w/Volume Control 19) Source Selectors 20) Car Antenna Jack – 75 ohm 21) FM Antenna Terminals 22) RCA Auxiliary Input Jacks 23) Harness 2 Remote Controls Identification Remote Controls Identification 1) Power 18) Eject 2) Source 19) Menu/Band 3) Numeric Buttons 20) Audio Mode 4) Mute 21) Vol + 5) Tune Up 22) Vol – 6) Tune Down 23) Up 7) Previous 24) Next 8) Left 25) Right 9) Enter 26) Down 10) Fast Reverse 27) Fast Forwarding 11) Stop 28) Play / Pause 12) Subtitle 29) Display 13) Setup 30) Title 14) Program 31) Repeat 15) Audio (DVD) 32) Time / Freq 16) Go To 33) Zoom 17) Angle 3 Operating Instructions: NOTE: Number in parenthesis (#) corresponds with “Control Identification” on page 3. Note : Power can be turned on by pushing any button on the front of the AWM950. LIQUID CRYSTAL DISPLAY PANEL The liquid crystal display (LCD) panel displays the frequency, time and activated functions. Note: It is characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD readout will return to normal when the temperature increases to a normal range. TUNER 1) Turn power on by pushing the Power switch /Volume control button (18). 2) Use the Source Selectors (19), select the AM/FM button 3) Use the Speaker Selector Switch(14) to choose speaker output 4) Use the Tuner Up (1) or Down (2) buttons to select station manually. Also, the Station Preset buttons can select stations (this will be discussed later in the manual). Push either of the seek buttons (1 or 2) to tune to the next higher or lower active station. 5) Adjust Volume Control (18) to suit taste. DVD PLAYER 1) Turn power on by pushing the power switch / volume control button (18). 2) Insert an available disc such as DVD, CD, or MP3 CD into the DVD player (12) 3) Use the Speaker Selector switch (14) to choose between speaker output, headphones or both. 4) Press the DVD Play/Pause button (11). 5) You may change tracks or chapters by using the Next or Previous buttons (8). 6) To change to AM/FM or Aux. Inputs, press the corresponding button; to return to DVD press the DVD button. 8) To eject the disc, press the Eject button(13). AUXILIARY INPUT 1) Push Power Switch (18) “On”. 2) Using the Source Selectors (19), choose the button labeled “AUX”. 3) If there is an external source (example: CD shuttle or TV audio) connected to the Auxiliary Input Jacks (22) on the rear of the radio, then you can listen to your external source through the system. SETTING THE CLOCK 1) Push Power Switch (18) “On”. 2) Press the T/F button (4) to display the clock 3) Hold the T/F button (4) and simultaneously use the H and M buttons (1 and 2) to adjust hours and minutes. Note: The T/F also toggles between time and radio frequency on the display. SETTING STATION INTO MEMORY PRESET 1) This unit has the ability to set 18 FM and 12 AM stations into memory. 2) To set the AM or FM stations into memory, first tune to the desired station. 4 3) Then press and hold one of preset buttons (8,9,10 or 11) for more than 3 seconds. DVD PLAYBACK OPERATIONS ***Please refer to the remote control figure on page 4. PLAY/PAUSE Press the button to play or pause. EJECT Press ...