Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
The VCR will start recording when AV2 input detects the video signal and stop recording when the video signal is switched off by the external unit. TV Owner ID Owner ID PIN number : 846* Name : ************** House No : *********** Postcode : *********** Tuning Manual Auto Setup Shipping condition Owner ID Owner ID Name : MARWIN House No : BANKS Postcode : RG12 8FT VCR DVD To change the Owner ID Press MENU and select Tuning Press ENTER. Select Owner ID and press ENTER. Use the Numeric buttons or to enter the current PIN number. -After entering the correct PIN number, you can change the Name, House No and Postcode. Press ENTER to conclude the setting. Use , the Numeric buttons and ENTER to select and change the desired information. Press EXIT to exit the On Screen Display. To display the Owner ID information VCR . Keep EJECT pressed for more than 5 seconds. Notes: -The PIN number is not displayed. -After 30 seconds, this menu automatically disappears. VCR DVD VCR DVD TV VCR DVD The clock will normally be set correctly during Auto-Setup however, in some Clock setting circumstances the VCR cannot set the clock automatically. In this case, follow On Screen Display. Menu Timer recording Tuning Clock set Others :select : access : exit ENTER EXIT Clock set Time : 12 : 00 : 00 Date : 11. 6. 03 MANUAL Clock set Time : 12 : 00 : 00 Date : 11. 6. 03 AUTO the operation steps below to manually set the clock. To manually adjust the clock Press MENU and select Clock set . Press ENTER. Confirm that Clock set is set to MANUAL, and press ENTER. Use or Numeric buttons to set the Date and Time. Press ENTER to conclude the settings. Press EXIT to exit the On Screen Display. To activate the automatic time correction function The correct time for the VCR clock can be automatically maintained when the VCR is tuned to a station that transmits a time signal. Press MENU and select Clock set . Press ENTER. Use to set AUTO. Press ENTER to conclude the setting. Under adverse reception conditions, etc., the Automatic time correction function may not work. In this case, the indication for Clock setting is automatically reset to MANUAL. If the reception conditions improve later on, it may be possible to activate this function. Press EXIT to exit the On Screen Display. Notes: -If Clock setting is set to AUTO when you open the Clock screen, do not set it to MANUAL, otherwise, the automatic time correction function is deactivated. -This VCR uses a 24 hour clock. -In case of a power failure, an automatic back-up system maintains the clock for approximate 60 minutes. -When Clock setting is set to AUTO, the automatic time correction function checks and if necessary adjusts the time several times every day. The automatic time correction function only works when the VCR is in standby, it does not work in the timer recording mode. TV control Setting the Remote Control to operate your TV TV VCR DVD Set the VCR/TV/DVD switch to TV. Only Panasonic TVs can be operated with the provided remote control. The settings for operating the TV with the remote control have already been made. No additional settings need to be performed. However, some of old Panasonic TVs cannot be operated using this remote control. TV TV-Standby/on Press to switch the TV from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 1 2 3 4 5 7 8 9 0 6 10 Numeric (0-9) To select desired programme position. AV INPUT SELECT AV To select desired AV input on the TV. CH TRACKING/V-LOCK CH Channel selector VOLUME VOLUME To adjust the volume of the TV. TV ASPECT TV ASPECT To switch the screen format between the wide-screen and other aspects. AUDIO out settings VCR DVD TV VCR DVD AUDIO Audio mode (L/R) At each press of the AUDIO button, the selected sound output is indicated with L (Left) and R (Right). Stereo playback : Display: LR Left audio channel playback : Display: L Right audio channel playback : Display: -R Playback of normal audio (Mono) sound : Display: - NICAM sound system The NICAM System is a 2 channel digital sound broadcast system which in most instances provides high quality stereo sound. Broadcasters can also transmit two separate mono soundtracks on this system. AUTO: When you record a programme which is broadcast with NICAM sound, the NICAM sound is automatically recorded. OFF: If you want to record the normal (mono) sound on the Hi-Fi audio tracks during a NICAM broadcast, or if the stereo sound is distorted due to poor reception conditions. Tuning Pos Name Ch Pos Name Ch 6 ----- 7 ----- 8 ----- 9 ----- 10 ----- 1 BBC1 7 2 BBC2 4 3 ITV 2 4 CH4 12 5 CH5 13 Press Menu and select Tuning Press ENTER Select Manual and press ENTER Select a channel Press ENTER Select NICAM OFF Pos Name Channel NICAM : 1 : BBC1 : 7 : OFF Advanced functions TV VCR DVD R 0:05.57 On-screen display INDEX/SKIP QUICK ERASE Note: Repeat Playback The VCR repeats playback from beginning to end of a recording. In Stop or Playback mode, press the Playback b...
Este manual também é adequado para os modelos :DVD-player - NV-VP30EB (2.8 mb)
DVD-player - NVVP30EB (2.8 mb)
DVD-player - NVVP30EBL (2.8 mb)
VCR jogadores / vídeo - NVVP30 (2.8 mb)