Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
The unit turns off. 2Press [IDVD POWER] to 3Complete the TV Guide On is pressed after the “Watc ” IN2I N 2 CHC H HDD DVD SD S VIDEOS VIDEO VIDEOVIDEO L/MONOL/MONO-AUDIOAUDIO-R OPEN/CLOSEOPEN CLOSE DRID R I VEVE SELECTSELECT RECREC /x1.3 [Note] You can set scheduled recording only manually after you set the unit with “Set Channels Automatically”. Auto channel/clock settings 1 Press [SETUP]. 2 Press [3, 4] to select “Channel” and press [1]. 3 Press [3, 4] to select “Set Channels Automatically” and press [ENTER]. 4 Press [2, 1] to select “Yes” and press [ENTER]. 5 Press [ENTER]. Auto Channel Setting starts. This takes a few minutes. The unit then proceeds with Auto Clock Setting. The time is displayed when finished. Channel SETUP Setup Disc Video Set Clock Automatically Auto Clock Setting is complete. 4/4/2005 12:15 AMDST.............. On Time Zone..... CST .DST, Daylight Saving Time, shows the summertime setting. .TIME ZONE shows the time difference from Greenwich Mean Time (GMT). EST (Eastern Standard Time) l GMT j5 CST (Central Standard Time) l GMT j6 MST (Mountain Standard Time) l GMT j7 PST (Pacific Standard Time) l GMT j8 AST (Alaska Standard Time) l GMT j9 HST (Hawaii Standard Time) l GMT j10 For other areas: xx hr .If the Auto Clock Setting does not start automatically, select “Clock Settings” from the “Setup” tab and then select “Set Clock Automatically”. .If the time was not set correctly, use manual clock setting (. 17) or adjust time zone. 6 Press [ENTER]. .The unit configures channels according to the Signal Source (RF IN) settings as follows. Signal Source Band Channel (RF IN) Antenna VHF UHF 2–13 14–69 VHF 2–13 CATV LOW BAND 95–99 CATV MID/SUPER BAND 14–36 CableTV CATV HYPER BAND 37–65 ULTRA BAND 66–94 100–125 SPECIAL CATV CHANNEL 1 Adjust Time Zone Adjust the time zone (j1 or i1) if it was not set correctly with auto clock setting. You cannot change this setting if you set the clock manually. 1 Press [SETUP]. 2 Press [3, 4] to select “Setup” and press [1]. 3 Press [3, 4] to select “Clock Settings” and press [ENTER]. 4 Press [3, 4] to select “Adjust Time Zone” and press [ENTER]. SETUP Setup Adjust Time Zone j1 0 i1 Channel 5 Press [3, 4] to select “s1” or “r1” and press [ENTER]. Convenientfunctions To return to the previous screen Press [RETURN]. To exit the screen Press [SETUP]. To cancel partway while Auto Channel/Clock Setting is taking place Press [RETURN]. RQT8023 57 Channel/Clock settings when TV Guide On ScreenTM system is not used Refer to the control reference on page 54. Channel captions You can use the preset captions, or manually enter new ones yourself. The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen. .You can set channel captions only after “Set Channels Automatically” is completed (. 57). 1 Press [SETUP]. Channel SETUP Setup Disc Video Audio Display TV Screen Set Channels Automatically Channel Captions Preset Channel Captions Manual Channel Captions TV Guide Settings Signal Source (RF IN) CableTV 2 Press [3, 4] to select “Channel” and press [1]. Preset Channel Captions 3 Press [3, 4] to select “Preset Channel Captions” and press [ENTER]. SETUP Setup Disc Video Audio Display TV Screen Channel Preset Channel Captions Caption Channel Number GLOB ABC PBS CBS ENTER 4 Press [3, 4] to select the caption and press [1]. You can choose from the following captions. ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC, FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV, WB, TSN, DSC, GLOB .When selecting the caption, press and hold [3, 4] to scroll up and down the screen. 5 Press [3, 4] to select the channel corresponding to the caption and press [2]. .Channels are only displayed if they contain a station and if captions have not been added manually. .To delete the channel number, press [. CANCEL]. Repeat steps 4 and 5 to enter other channels. 6 Press [ENTER]. Manual Channel Captions 3 Press [3, 4] to select “Manual Channel Captions” and press [ENTER]. 4 Press [3, 4] to select the channel and press [1]. .Channels are only displayed if they contain a station and if preset captions have not been added. 5 Press [3, 4] to select the first character and press [1]. .You can choose from the following characters: A–Z, 0–9, -, &, !, /, (space) .To delete the caption, press [. CANCEL]. .Repeat this step to enter the other characters. SETUP Setup Disc Video Audio Display TV Screen Channel Manual Channel Captions CaptionChannel Number AAAA 6 10 12 23 8 ENTER 6 Press [2, 1] to return to the “Channel Number” column. Repeat steps 4–6 to enter other channels. 7 Press [ENTER]. Convenientfunctions To return to the previous screen Press [RETURN]. To exit the screen Press [SETUP]. RQT8023 58 Messages On the television Page Cannot finish recording completely. .The program was copy-protected. .The HDD or disc may be full. .The maximum number of times you can record the program is exceeded. — — — Cannot play. .You inserted an incompatible disc (Discs recorded in PAL...