Log:
Assessments - 2, GPA: 4 ( )

Instruções de Operação Toshiba, Modelo D-R2SC

Fabricante : Toshiba
Arquivo Tamanho: 6.91 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


, . CONTENT MENU An entered character will appear here. e.g. Cursor Language Estimated end of the first line on the CONTENT MENU. Estimated limit of characters displayable on the CONTENT MENU. The character being selected appears. Operation guide Operation guidance of the remote control To enter the character, normally use the direction / / / buttons on the remote. About the other buttons to be used are shown on the operation guide. 1 2 3 4 5 6 7 8 9 : Shifts a cursor. : Enters the number. DELETE : Erases one character immediately to the left side of the cursor. CLEAR : Erases all the characters on the input column. : Caps Lock : Saves the changes on the input column and returns to the previous screen. : Cancels the changes on the input column and returns to the previous screen. : Enters a space. : Enters a symbol. Switching a language Before entering a character, move a cursor to the language selection area by pressing the / buttons. Then press the / buttons to select a language, then press the ENTER button. Entering characters The cursor may be followed by unwanted characters. You can erase them if necessary by either of the following measures: Erasing characters • Erasing all the characters on the writing board Select “Clear All” by pressing the / / / buttons, then press the ENTER button. Alternatively, open the lid of the remote control and press the CLEAR button. • Erasing one character before the cursor Select “BkSp” by pressing the / / / buttons, then press the ENTER button. Alternatively, open the lid of the remote control and press the DELETE button. (1) Press the button to select an input mode. (2) Press the / / / buttons to select a character, then press the ENTER button. The selected character is input on the cursor. (3) Repeat steps 1 and 2 to enter characters. (4) When finished, press to save the characters. The characters you entered appears. Notes • You can enter up to 64 characters. • When unnecessary information appears, or when you want to alter the input character, press the CLEAR button to erase all, or press the DELETE button to erase an unnecessary character. Introduction Recording PlaybackEditing Library Function setup Others Recording Recording a TV program DVD-RAM DVD-RW DVD-R To record a TV program currently being broadcast, follow the procedures of this chapter. Preparation • Load a DVD-RAM/R/RW disc into the recorder. - Load a disc which has sufficient space available to record the program. - Make sure the loaded disc is not write-protected. • If you record on a DVD-R or a DVD-RW disc, set “DVD compatible mode” ( page 134) to “Main” or “SAP.” In DVDR/ RW recording, “Off” setting is regarded as “Main.” • If you record on a DVD-R or DVD-RW disc, set “Aspect ratio(Video mode)” ( page 134) according to recording sources. TIMESLIP EASY NAVI INSTANT SKIP INSTANT REPLAY PLAY STOP PAUSE REC LIBRARY REC MENU EDIT MENU CONTENT MENU ANGLE OPEN/CLOSE SUBTITLE AUDIO CHANNEL QUICK MENU TOP MENU MENU RETURN DVD FRAME/ADJUST PICTURESEARCH SKIPSLOW ENTER TV/VIDEO CHANNEL VOLUME REMAIN DIMMER FL SELECT ZOOM P in P TIME BAR CHP DIVIDE DISPLAY INPUT SELECT PROGRESSIVE TV 1 Press INPUT SELECT repeatedly to select a recording source. Each time you press the button, the indicator alternates. Ch-: To record a TV program or cable program with recorder tuner. L-1: To record a source connected to the INPUT1 jacks on the rear panel ( page 36). L-2: To record a source connected to the INPUT2 jacks on the front panel ( page 36). L-3: To record a source connected to the INPUT3 jacks on the rear panel ( page 36). To record a program from a connected set top box, set the channel to “Ch-3”, “Ch-4”, “L-1” or “L-3” according to the connection (the same as page 40 on “INSTALLATION GUIDE”). If the connection of the supplied IR control cable and the necessary settings are all done, you can select channels of the connected set top box with the recorder’s remote control. If not, select the proper channel on the set top box to receive the desired program. INPUT SELECT Introduction PlaybackRecording Editing Function setup OthersLibrary TIMESLIP EASY NAVI INSTANT SKIPINSTANT REPLAY SETUP ENTER T.SEARCH CLEAR 31 2 VCR Plus+ REC MODEEXTEND TV CODE 4 5 6 DELETE +10 7 8 9 0 PLAYSTOPPAUSE RECLIBRARY REC MENU EDIT MENU CONTENT MENU ANGLE OPEN/CLOSE SUBTITLE AUDIO CHANNEL REC QUICK MENU TOP MENU MENU RETURN DVD FRAME/ADJUST PICTURESEARCH SKIPSLOW ENTER 2 Press the number buttons to select a channel to record. The CHANNEL buttons ( / ) are also available. 3 Press QUICK MENU to display the Quick Menu. (If you want to use the default setting for “AV record quality,” skip to step 7.) 4 Press / to select “AV record quality,” then press ENTER. 5 Press ADJUST to select the setting number. e.g. See page 40 for details on “Mode”, “Rate” and “Audio quality”. (Continued) 1 2 3 4 5 6 7 8 9 0 AV record quality Custom setting 5 4 3 2 1 D / M1 D / M1 D / M2 D / M1 L-PCMManual Manual Manual SP LP 6. 6 4. 6 2. 2 6. 0 3. 2 ModeSetting Rate Audio ...

Este manual também é adequado para os modelos :
DVD-player - D-R2SU (6.91 mb)
DVD-player - D-KR2SU (6.91 mb)
DVD-player - D-KR2SU (6.91 mb)
DVD-player - D-R2SU (6.91 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias