Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved. 2 IB-DVD2003-COMPUSA-E-061202 CONNECTIONS Choose Your Connection There are several ways to connect your DVD player. Please use the following chart to determine which connection is best for you. Turn to the appropriate page and connect your DVD player. COMPONENTS CABLES NEEDED GO TO ... Í (j • Audio/Video (included) • Coaxial (optional) • S-Video (optional) TV + DVD Page 4,5 Í (i * o'10 • Audio/Video (included) • Coaxial (optional) • S-Video (optional) TV + DVD + VCR Page 6,7 I (i Xj *<* • Audio/Video (included) • S-Video(optional) • Coaxial (needed but not included) TV + DVD + Dolby Digital Page 8 Í sc ¡5 ^ mc* ^ • Audio/Video (included) • Coaxial (optional) • S-Video (optional) TV + DVD + VCR + Satellite Page 9 Cables Needed to Connect Components to Your TV The pictures below show the cables needed for the connections represented in this booklet. NOTE: Audio/Video cables (A / V cables for short) are usually sold as a bundled set, but the connection pictures in this booklet show each cable separately for better visibility. Audio/Video cables (1 set is included) & PIN VIEW Coaxial cable (not included) S-Video cable (not included) 3 IB-DVD2003-COMPUSA-E-061202 CONNECTIONS DVD Player + TV with Audio/Video Input Jacks 1. Insert the audio cables into the AUDIO OUT L (left=white) and R (right=red) jacks on the back of your DVD player, and into the corresponding AUDIO IN jacks on your TV set. 2. Insert the video cable (yellow) into the VIDEO OUT jack on the back of your DVD Player, and into the VIDEO IN jack on your TV. This connection will allow you to enjoy standard quality video images. 3. Insert the AC power cord into an AC outlet. 4. Go to Page 20 for playing DVDs (discs). NOTE: Your cable or antenna connection to the television should not be affected by this connection. Connect your antenna cable to your television as you normally would. You may need to consult your television manual for details, but no changes will be made to your current antenna connections. 4 IB-DVD2003-œMPUSA-E-061202 CONNECTIONS DVD Player + TV with Audio/Video Input Jacks Using S-Video Cable 1. Insert the audio cables into the AUDIO OUT L (left=white) and R (right=red) jacks on the back of your DVD player, and into the corresponding AUDIO IN jacks on your TV. 2. Insert the S-Video cable into the S-VIDEO OUT jack on the back of your DVD player and to the S-VIDEO jack on your TV. This connection will allow you to enjoy higher quality images. If your TV doesn’t have S-VIDEO, use the basic video connection listed above on Page 4 (yellow plugs: VIDEO IN or OUT, are not needed for S-Video). 3. Insert the AC power cord into an AC outlet. 4. Go to Page 20 for playing DVDs (discs). NOTE: Your cable or antenna connection to the television should not be affected by this connection. Connect your antenna cable to your television as you normally would. You may need to consult your television manual for details, but no changes will be made to your current antenna connections. 5 IB-DVD2003-COMPUSA-E-061202 CONNECTIONS DVD Player + TV + VCR YOUR TV SET AUDIO OUT raudioinl video in Iç-ç-ç S-VIDEO Hi flm- RED WHITE YELLOW J S-Video cable is optional (Cable not Included) S-Video provides sharper TV images than normal video Use S-Video if your TV set has an S-Video jack. YOUR DVD PLAYER NOTE: Connections of your DVD player to your VCR are not shown because copying of DVD discs is not legal and most DVD discs nave anti-copying protection. © To AC Outlet L YOUR VCR OJTTOTV I ho- I This antenna connection is the same as you have now. HO®*“ J © CABLE OR OFF-AIR SIGNAL 1. Insert the audio cables into the AUDIO OUT L (left=white) and R (right=red) jacks on the back of your DVD Player, and into the corresponding AUDIO IN jacks on your TV. 2. Connect the video cable. • Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV. -OR- • S-Video (optional) - If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your DVD player (for sharper pictures) and to the S-Video jack on your TV. If your TV doesn’t have S-Video, use the basic video connection listed above (yellow plugs: VIDEO IN or OUT, are not needed for S-Video). 3. Connections of your antenna cables are not changed when you add your DVD player. 4. Insert the AC power cord into an AC outlet. 5. Go to Page 20 for playing DVDs (discs). 6 IB-DVD2003-COMPUSA-E-061202 CONNECTIONS DVD Player + TV/VCR Combination YOUR TV/VCR SET (COMBINATION ON 2 IN 1 SET) VRF NOTE: On some combination TV/ VCR sets, you may have to unplug the VCR cable for the DVD set to operate properly. © Ï VIDEO RF MODULATOR (ILLUSTRATION IS EXAMPLE ONLY) AC120V IN...