Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Since this unit plays discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the discs. C. Contents 1. 1 x 8’’ LCD Monitor & DVD Player Combo 2. 1 x AC to DC Adapter 3. 1 x Rechargeable Battery 4. 1 x Remote Control with battery 5. 1 x Instruction Manual 6. 1 x AV Cable 7. 1 x DC Power Adapter 3 D. Powering and installation 1. Powering the system indoors (Refer to Figure 1) Plug one end of the AC to DC adapter into the DC 9V jack on the left side of the main unit, then plug the other end into the 120V AC power socket. 2. Powering the system in a car (refer to Figure 1) Plug one end of the DC Power adapter into the DC 9V jack on the unit, then plug the other end into the cigarette lighter socket. 1 2 Figure 1 4 E. Controls, Indicators, and Connectors 1. Unit View (Refer to Figure 2) 1) DC 9V Input Jack 2) Audio Jack (L+R) 3) Video Jack 4) AV Input /Output Switch 5) Brightness Control 6) MENU 7) Up button 8) Left Button 9) OK Button 10) Down Button 11) Right Button 12) Close disc cover point 13) Open Button 14) Previous Button 15) Stop Button 16) Next Button 17) Play Button 18) Pause Button 19) Screen Mode ( wide) Button 20) Power Saving Mode Switch Figure 2 21) NTSC/PAL Switch 22) Coaxial Jack 23) Hi-Fi Headphone Jack 24) Volume Control 25) Power On/ Off Switch 26) Remote Control Sensor 27) Power LED 28) Battery Clips 29) Battery Connector 5 2. Remote Control View (Refer to Figure 3) 1) Display Button 2) Angle Button 3) Subtitle Button 4) Audio Button 5) Zoom Button 6) UP/DOWN/LEFT/RIGHT/ ENTER Buttons 7) Return Button 8) A-B Button 9) Forward Button 10) Reverse Button 11) Slow Button 12) Stop Button 13) Number Buttons 14) Setup Button 15) Menu Button 16) Repeat Button 17) SKIP18) SKIP+ 19) Play Button 20) Pause Button Figure 3 F. Loading and Playing a Disc a. After connecting power to the unit, Slide the power switch to the “ON” position, the power indicor will illuminate red. b. Open the disc tray by pressing OPEN , and place a disc into the tray with the labal side facing up. c. Close the tray with pressing “PRESS” button.The unit will load the disc and start playing by pressing “PLAY”. d. Rotate the BRIGHT and VOLUME Controls to adjust the LCD’s brightness and the DVD player’s volume. e. To stop playing a disc, press STOP. 6 G. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback mode. Figure 7. Main SETUP Menu Screen 1) Press “Setup”, the ‘GENERAL SETUP PAGE’ will display on screen. Figure 8. SPDIF Output Screen a).Select “SPDIF Output” using the DOWN button, Then, press “Right” enter the Submenu, select SPDIF OFF, SPDIF/RAW, SPDIF/PCM by press UP/DOWN and confirm the setting by Enter. Press LEFT to return. * SPDIF OFF: the digital signal Audio output is off. * SPDIF/RAW: the signal output from“COAXIAL”. * SPDIF/PCM: the signal output will be pulse code Modulation b).Select TV DISPLAY using the DOWN button, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting. Press LEFT to return. 7 * NORMAL/PS: When the player is connected to a normal TV, and a wide picture is shown on the full screen. * NORMAL/LB: When the player is connected to a normal TV, and a wide picture is shown on the screen with a black strip at both the top and bottom of the screen. * WIDE: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. Figure 9. TV DISPLAY Screen Display c).Select ‘ANGLE MARK’ using the DOWN buttton, and then press the RIGHT button to enter the submenu. Choose Angle Mark on or off using the UP/DOWN buttons and then press ENTER to confirm the setting. Press the LEFT button to return. Figure 10. ANGLE MARK Screen Display * ON: The screen will show the angle mark icon. (*If an angle option is available). * OFF: The screen will not display the Angle Mark NOTE: Not all discs contain above features. 8 d). Select ‘SCREEN SAVER’ using the DOWN button. Figure 11. SCREEN SAVER Display *ON: enables screen saver *OFF: disables screen saver (off) *NOTE: The DVD player will enter the Screen Saver mode after approximately five minutes if the same image remains on the screen. e). Select “ Last Memory” using the DOWN button. Figure 12. LAST MEMORY Screen Display *on: The unit will return to the last position on the disc. *off: The unit will not return to the last position on the disc. 2) With no disc inside the player select “Video quality Setup”by using the LEFT/RIGHT buttons, press “enter” to enter the video quality set up page. Figure 13. Main SETUP Menu VIDEO QUALITY 9 a).Select “Brightness by using the UP or DOWN buttons ,then press “Enter”you can change the Brightness by pressing the LEFT or RIGHT buttons. To exit “Brightness Setting”, press “Enter”again to return to the main Menu. Figure ...