Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
Please fully charge the battery prior to first use. NOTE: When the DVD player is used with the battery as a power source, ensure that the battery has been charged for at least eight hours prior to connecting it to the DVD player. If you plan not to use the battery for an extended period of time (one week or longer), it is recommended that you first fully charge the battery and store it away properly. For longer periods of storage, please recharge the battery at least once every two months to 22 PDF created with FinePrint pdfFactory Pro trial version maintain the battery in optimum condition. Under no circumstances short the battery terminals, store the battery in a metal container, or leave the battery in a humid or damp environment. Ideally, store the battery in an airtight container with desiccant or other dehumidifying agent. Each full recharge takes approximately five-hours and one full charge can provide power to the player for at least 2.5 hours. During recharge, the red indicator will stay on. Once fully recharged, the LED on the right side of the unit will turn off. At this point you may remove the wall plug and stop charging. Precautions related to Battery Recharge: 1. Once the battery is fully discharged, immediately recharge (regardless of whether you plan to use battery or not) in order to maximize battery life. 2. Recharge efficiency will degrade when environmental temperatures drop below 50oF (10oC) or exceed 95oF (35oC). 3. Please remove battery from the player and store it properly if the player is not to be used for long time. During this period, please recharge the battery at least once every two months to avoid irreparable damage to the battery. Using your Rechargeable Battery 1. Please make sure you always use only the AC adapter included with the player to recharge your battery. The DC Power Adapter cannot be used to recharge the battery. 2. To charge the battery, please connect the power jack directly into the DVD player and leave the POWER switch in the OFF position. 23 PDF created with FinePrint pdfFactory Pro trial version Installing the Battery Pack: 1. Set the Power ON/OFF switch to the OFF position. 2. Disconnect the DVD player from the AC power source. 2. Flip down the monitor. 3. Push the battery towards the rear of the DVD player until it locks into position. The lock position is indicated by a click. The battery will fit tightly to the player. Figure 7. Installing the DVD Player Battery Removing the Battery Pack: 1. Set the Power ON/OFF switch to the OFF position. 2. Press the release button on the side of battery. 3. Pull the battery away from the rear of the DVD player. Press Figure 8. Removing the DVD Player Battery 24 PDF created with FinePrint pdfFactory Pro trial version R. Troubleshooting •Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. •You can’t advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number that is out of range. Can’t advance through a movie The icon ( ) appears on screen SOLUTION PROBLEM No sound or distorted sound Picture is distorted •The disc might be damaged. Try another disc. •It is normal for some distortion to appear during forward or reverse scan. • Some discs have sections that prohibit rapid scanning or title and chapter skip. •If you try to skip through the warning information and credits at the beginning of a movie, you won’t be able to. This part of the movie is often programmed to prohibit skipping through it. No forward or reverse scan 25 PDF created with FinePrint pdfFactory Pro trial version Troubleshooting (Cont) PROBLEM SOLUTION IR sensor • Verify that the batteries in the remote are inoperative fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. Disc won’t play • Insert a disc with the label side facing up. • Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s. Play starts, but then stops immediately • Both the unit and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. This DVD Player is Region Number 1. • The disc is dirty. Clean it. • Condensation has formed. Allow player to dry out. 26 PDF created with FinePrint pdfFactory Pro trial version U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD, HAUPPAUGE, NEW YORK 11788 l1-800-645-4994 CANADA : CALL 1-800-645-4994 FOR LOCATION OF WA...