Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
Press and hold SETTINGS button for about two seconds to enter the System Setup Page. Press or buttons to highlight the desired options and press or to adjust the values. 1. OSD Language Select among English, French and Spanish. 2. Airplane Mode (On/Off) When the Airplane Mode is turned on, “Airplane Mode Enabled” will be displayed for about three seconds when you try to enter the FLO TV mode. This setting will be retained even after switched off the main power. 3. Wide (On/Off) Switch between wide screen and 4:3 picture aspect ratio. 4. Brightness/Contrast/Saturation/Hue Adjust from -20 to +20. Default value is 0. 5. Reset Reset to factory default settings. This will reset all saved preferences in the settings options except the Parental Ratings and the default password. 6. Quit Select this option to quit the System Setup Page. You can also press the SETTINGS button or wait for few seconds timeout to quite the System Setup Page. 38 Specifications Specifications Compatible DISC: DVD, CD, CD-R, CD-RW, DVD+/-R, DVD+/-RW Signal system: NTSC Panel size: 7 inch Frequency response: 40 Hz to 20 kHz Video output: 1 Vp-p/75 Ohm, unbalanced Audio output: 1.4 Vrms/10K Ohm Audio S/N: Better than 60 dB Dynamic range : Better than 80 dB Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm Battery Specification: Internal (non-user replaceable) Lithium polymer 2100 mAh, 7.4V Power source: DC 9-12 V Power consumption: 13.5 W Standby Power consumption: < 1 mA @7.4 V Operating temperature: 41~95°F (5~35°C) Weight : 1.92 (Ib) Dimensions (W x D x H): 8.98 x 1.61 x 7.46 (inch) EN 39 Troubleshooting Troubleshooting FLO TV FLO TV Screen/Problem Explanation You may be out of a FLO TV coverage area; programming will resume when you are back in the coverage area. To check FLO TV coverage, visit flotv.com/maps. You will get this message for the following reasons: 1. You are not subscribed to a FLO TV service plan which includes this channel. Go to flotv.com to subscribe 2. You are not subscribed to this time and/or event channel. Go to flotv. com to subscribe 3. Due to security reasons, if you have not viewed the FLO TV service for over 60 days your service will be placed on ‘Hold’. In order to refresh your service, please call FLO TV Customer Care at 888-993-5688. Sports programming is subject to blackout restrictions. Your program may been blacked out based on what area you live in due to programming restrictions. The picture is not fitting-in the whole screen. FLO TV service is a 4:3 picture aspect ratio, and a normal picture will not fill the screen horizontally. Verify Signal Strength EN Select Settings and System Information to verify the signal strength. DVD Playback Problem Solution No sound or distorted sound Make sure the DVD player is connected properly. Make sure all cables are securely inserted into the appropriate jacks. Can’t advance through a movie You can’t advance through the opening credits and warning information that appear at the beginning of movies because the disc is programmed to prohibit that action. The icon ( ) appears on screen The feature or action cannot be completed at this time because: 1. The disc’s software restricts it. 2. The disc’s software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number that is out of range. Picture is distorted • The disc might be damaged. Try another disc. • It is normal for some distortion to appear during forward or reverse scan. 41 No forward or reverse scan • Some discs have sections that prohibit rapid scanning or title and chapter skip. • You will not be able to skip through the warning information and credits at the beginning of a movie. This part of the movie is often programmed to prohibit skipping through it. IR sensor inoperative • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. Disc won’t play Check the type of disc you put into disc tray. This DVD player only plays DVDs, audio CDs AND JPEG discs. Play starts, but then stops immediately • Your DVD player has been designed to process regional management information that is stored on DVD discs. The regional code for your player is 1 (The U.S.,U.S. Territories and Canada). Only DVD discs that have regional codes of 1 or ALL (for all regions) can be played by your player. • The disc is dirty. Clean it. • Condensation has formed. Allow player to dry out. Getting Help Customer Support EN FLO TV Customer Care can answer questions about your account, coverage area, and specific features available on the FLO TV service. Contact information: Web: FAQ: Email: Phone: 1-888-99-FLOTV (888-993-5688) Audiovox Customer Care number: 1-800-645-4994 Before requesting support, try to reproduce and isolate the problem. When you contact the Customer Care Center, be ready to provide the following...
Este manual também é adequado para os modelos :DVD-player - FLO TV DFL710PK (803.04 kb)