Assessments - 0, GPA: 4
(
)
)
|
Facilidade de uso
IR remote does not work Dead battery Replace battery Excessive skipping Unit is not mounted correctly Check mounting sleeve Physical defect in media Check media for scratches Bad Disc appears on display Focus error or disc is in upside down Press eject or RESET Incorrect Region Code appears on display Region code error Use only DVDs labeled “Region 1” or “All” only. Front panel will not open/close Front panel obstructed Remove the obstacle and press to resume the monitor open/close sequence. XM Radio Problem Cause Action You can not receive any XM channels Your XM Radio receiver is not activated Contact XM as described on page 79 You can not tune into a specific XM channel You may not be authorized to receive that channel Verify your subscription with XM Contact XM as described on page 79 No Signal appears on display The XM signal is blocked Move vehicle from obstructed area (such as inside a tunnel or a garage) This message may appear when driving inside a tunnel or under obstacles Make sure the antenna has a clear view of the sky Check Antenna appears on display The XM antenna is not connected The antenna cable is damaged Check XM antenna connection Check for pinched or cut antenna cable OFF AIR appears on display The selected channel is not in service Try another channel No song title or artist name is displayed This information may not be available for some music channels, news channels, or when there is no song playing This condition is normal, there is nothing wrong with your receiver XDVD8285 OPERATION Troubleshooting Bluetooth Problem Please connect first appears in the display Cause There is no mobile device connected to the head unit Action Pair and or connect a mobile device to the head unit as described on page 83 Mobile device will not connect to the head unit Bluetooth function is not active on the head unit Activate Bluetooth function as described on page 1 Bluetooth function is not active on the mobile device Refer to the owner's manual of your mobile device A mobile device is already connected to the head unit This head unit can only be connected to one device at a time Disconnect current mobile device first, then connect desired mobile device ERROR! Connect Timeout appears in the display The time limit for the pairing mobile device has been reached Pair the mobile device within 1 0 seconds Pairing Fail appears in the display The attempted pairing process has failed Retry the pairing process again Mobile device will not connect to the head unit automatically The Connect function is set to Manual. When the Connect function is set to Manual, the head unit will not connect to any mobile device automatically Set Connect function to Auto as described on page 8 Ring tone can not be heard through the speakers Ring tone volume is turned down Increase the volume of the ring tone using the rotary encoder during the ringing process MUTE function is activated on the head unit Press MUTE to cancel the mute function and resume audio Echo or noise is heard during a phone call Possible road noise or interior interference Close all open windows and turn off any fans or A/C Microphone opening on the front panel is obstructed Clear any obstacles in front of microphone opening Call is connected (but no audio can be heard through the speakers) Audio is routed to the mobile device Press Audio Transfer to allow audio from the phone to be heard through the speakers Call is answered automatically Auto Answer function is set to On Set Auto Answer function to Off as described on page 8 Caller ID does not appear during incoming call The calling mobile device is not set to send the Caller ID or, the service is not available Some devices may not communicate or work properly with this head unit 9 XDVD8285 OPERATION Specifications DVD Player Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Monitor Panel size: 6.5” (165.1 mm) diagonal measurement View angle (up/down/left/right): 40/55/60/60 Resolution: 400 W x 234 H Brightness (cd/m ): 350 Contrast ratio: 350:1 Elements: 280,800 General Operating voltage: 11-16 VDC, negative ground Speaker output impedance: 4~8 ohms Line output voltage: 2 Volts Line output impedance: 200 ohms Chassis dimensions: 7" x 6.3" x 3.9" (178 x 160 x 99 mm) Faceplate dimensions: 6.6" x .7" x 3.8" (167 x 18 x 97 mm) Sleeve dimensions: 7.1" x 3.9" x 4.4" (180 x 99 x 112 mm) Design and specifications subject to change without notice. CEA- 006 Power Standard Specifications (reference: 14.4VDC +/- 0. V, 0Hz~ 0kHz) Power Output: 17 Watts RMS x 5 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms) XDVD8285 OPERATION Notes Dual Electronics Corp. Toll Free: 1-866-38 -5476 www....