Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
When a DVD disc recorded in high sampling rate PCM is played, this setting makes it possible to select whether the signal is converted into 48 kHz signal or 44.1 kHz/16-bit signal. At the factory, the player has been set to " On" for AV amplifiers incompatible with high sampling rate digital signal connection. If the connected AV amplifier is compatible with 96 kHz digital input, change the setting to " Off". Setting items " " : Select to return to the previous screen. "On" : Select to down-convert the signal to 44.1 kHz/16-bit PCM signal. Select this setting when the connected AV amplifier is incompatible with 96 kHz digital input. ¦ The analog output signals are also converted accordingly. "Off" : Select to skip down conversion. Select this setting when the connected AV amplifier is compatible with 96 kHz digital input. However, if the disc inhibits the 96 kHz digital output, the signal is down-converted even when this setting is selected. ¦ With DVD AUDIO discs, the signal is always output after down sampling conversion. Operation procedure 1. Set the mode switch of the joystick remote to the Purple position. 2. While the player is in stop mode, press and 1 SET UP tilt the joystick up or down to display the " SOUND" menu of " SET UP MENU". 3. Press to open the setup screen. ENTER 4. In the setup menu, select " Digital Audio PCM Down Conversion" by tilting the joystick up or down and press . ENTER 7 7 On 7 Off Digital Audio Dolby Digital Speaker Setting Audio During Search Dynamic Range Control Audio Filter DTS MPEG PCM Down Conversion 5. Select " On" or " Off" by tilting the joystick up or down, then press ENTER to enter the selection in memory. Chapter 2: Setups "Digital Audio Dolby Digital" Setting When a DVD recorded in Dolby Digital is played, this setting makes it possible to select the the digital output connector of the player. At the factory, the player has been set to " Bitstream" to enable digital connection to an AV amplifier with built- in Dolby Digital decoder. Change the setting to " PCM" when the digitally connected amplifier does not incorporate the decoder. Setting items " " : Select to return to the previous screen. "Bitstream" : The signal is output as a bitstream. Select when connecting a component containing Dolby Digital decoder. "PCM" : The signal is converted onto 48 kHz (2CH.) PCM signal before being output. Select when connecting a component without Dolby Digital decoder. 26 Chapter 2: Setups Operation procedure 1. Set the mode switch of the joystick remote to the Purple position. 2. While the player is in stop mode, press and 1 SET UP tilt the joystick up or down to display the " SOUND" menu of " SET UP MENU". 3. Press to open the setup menu. ENTER 4. In the setup menu, select " Digital Audio Dolby Digital" by tilting the joystick up or down and press . ENTER 7 Bitstream 7 PCM 7Digital Audio Dolby Digital Speaker Setting Audio During Search Dynamic Range Control Audio Filter DTS MPEG PCM Down Conversion 5. Select the audio output by tilting the joystick up or down, and press ENTER to enter the selection in memory. "Digital Audio DTS" Setting When a DVD or DTS-CD recorded in DTS is played, this setting makes it possible to select output from the digital output connector. At the factory, the player has been set to " Bitstream" to enable digital connection to an AV amplifier with built-in DTS decoder. Change the setting to " PCM" when the digitally connected amplifier does not incorporate the decoder. Setting items " " : Select to return to the previous screen. "Bitstream" : The signal is output as a bitstream. Select when connecting a component containing DTS decoder. "PCM" : The signal is converted onto 48 kHz (2CH.) PCM signal before being output. Select when connecting a component without DTS decoder. Operation procedure 1. Set the mode switch of the joystick remote to the Purple position. 2. While the player is in stop mode, press and 1 SET UP tilt the joystick up or down to display the " SOUND" menu of " SET UP MENU". 3. Press to open the setup screen. ENTER 4. In the setup menu, select " Digital Audio DTS" by tilting the joystick up or down and press . ENTER 7 7 Bitstream 7 PCM Digital Audio Dolby Digital Speaker Setting Audio During Search Dynamic Range Control Audio Filter DTS MPEG PCM Down Conversion 5. Select the audio output by tilting the joystick up or down, and press to enter the selection in memory. ENTER Settings 27 Settings Settings "Digital Audio MPEG" When a DVD recorded in MPEG Audio is played, this setting makes it possible to output from the digital output At the factory, the player has been set to " Bitstream" to enable digital connection to an AV amplifier with built-in MPEG decoder. Change the setting to " PCM" when the digitally connected amplifier does incorporate the decoder. Setting items " " : Select to return to the previous screen. "Bitstream" : The signal is output as a bitstream. Select when connecting a component containing MPEG decoder. "PCM" :...
Este manual também é adequado para os modelos :DVD-player - DV-4070 (849.99 kb)
DVD-player - DVF-R7030 (849.99 kb)
DVD-player - DV-4900 (849.99 kb)