Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
. “INPUT TITLE” (. pg. 52, “Modify Title Name”) . “CATEGORY” (. pg. 53, “Modify Category”) . “VPS/PDC” (. pg. 47, “PDC Recording”)* * VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this unit. . “WEEKLY/DAILY” (. pg. 47, “Weekly/Daily Recording”) . “REC MODE” (. pg. 37, “Recording Mode”) 9 Press rtto select “OK”, then press ENTER to access the Programme Confirmation screen. 10 Press weto select “EXIT”, then press ENTER to complete timer programming. . To programme another timer, press weto select “CONTINUE”, then press ENTER. . If “PROGRAMME OVERLAPPED” appears on the TV screen, see page 49. NOTES: . There may be cases that VIDEO Plus+ Timer Programming function prolongs the stop time of the programming. . When two successive programmes are recorded on a DVD-RW disc with VIDEO Plus+ Timer Programming function, the beginning of the second one may be left off the recording. . If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed. IMPORTANT: If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong programme number will be displayed on the VIDEO Plus+ programme screen in step 7. When this happens, set the correct Guide Program number for that station. (. pg. 72, “VIDEO Plus+® System Setup”) Satellite Receiver Users To timer-record a satellite broadcast using the VIDEO Plus+ system: A Perform “Satellite Receiver Control Setting” (. pg. 25). B Perform “VIDEO Plus+® Timer Programming” (. pg. 46). C Leave the satellite receiver’s power on. Page 46 Thursday, 3 June 2004 16:51 Filename [DR-MH30EU_07Timer Recording.fm] Masterpage:Right+ DR-MH30EU_00.book Page 47 Thursday, June 3, 2004 11:00 AM TIMER RECORDING EN 47 Weekly/Daily Recording You can record programmes with one of the following weekly/daily timer settings. For the HDD deck When you select a mode other than ONCE, the space on the hard disk drive is saved for new recordings by overwriting previous recordings. To prevent loss of a needed recording, backup programmes you wish to save by dubbing them to DVD discs before overwriting previous recordings. ONCE (One Time Recording) In this mode a programme will not be automatically overwritten. WEEKLY (OVERWRITE) (Weekly Recording/Weekly Overwrite) When the set weekly programme is broadcast, the programme recorded last week is automatically deleted and overwritten by the new programme. Overwritten This week’s drama Last week’s drama MON–SUN (FOR A WEEK)/ MON–SAT (FOR A WEEK)/ MON–FRI (FOR A WEEK) (Daily Recording/Weekly Overwrite) When the set weekly programme is broadcast, the programme recorded on the same day last week is automatically deleted and overwritten by the new programme. This week Overwritten Last week MON TUE WED THU FRI MON TUE WED THU FRI MON–SUN (OVERWRITE)/ MON–SAT (OVERWRITE)/ MON–FRI (OVERWRITE) (Daily Recording/Daily Overwrite) When the set daily programme is broadcast, yesterday’s programme is automatically deleted and overwritten by the new programme. Overwritten Tuesday’s programme Monday’s programme For the DVD deck ONCE (One Time Recording) WEEKLY (Weekly Recording) MON–SUN/ MON–SAT/ MON–FRI (Daily Recording) PDC Recording Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your unit and have precedence over the advertised times which you may have preset into the timer. This means that your unit will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed from what has been advertised. PDC is currently available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a few small relay transmitters. Ch.3 operates a PDC service in some areas. All channels intend to offer this service in due course. Check your TV programme listing guide for latest information. If the channel you intend to record does not offer a PDC service your unit will not start recording if PDC has been selected. Be sure to set PDC to “OFF” if PDC is not available on your selected channel. (See step 8 on page 46.) NOTES: . Make sure to press VPS/PDC# after completing timer programming procedure to activate the VPS/PDC recording function. . When you use Manual Timer Programming, set the start time (PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording. . PDC recording is also possible when a satellite receiver or a cable system is connected to L-2 IN/DECODER connector on your unit. . PDC recording is also possible via the L-1 IN/OUT connector. Page 47 Thursday, 3 June 2004 10:46 Filename [DR-MH30EU_07Timer Recording.fm] Masterpage:Left+ D...
Este manual também é adequado para os modelos :DVD-player - DR-MH20B (4.09 mb)