Assessments - 4, GPA: 3.3
(
)
)
|
Facilidade de uso
If any of the discs in the drives contains data, (in this case, that would be the first disc, the Master Disc for job A) the autoloader will load the entire content of this disc (Master A) into the reserve partition on the Hard Drive. The subsequent discs from the input bin/spindle will be loaded in the empty drives. Once the loading process is completed, the autoloader will start the duplication process for the blank media in the remaining drives. Master disc A will be picked up from the appropriate drive and dropped on to the Output Spindle and the empty drive where the master disc was removed will be loaded with the next disc from the input bin. If a new master is detected before the previous job is finished, the autoloader will complete the first job, unload the completed job, and fill the drive trays with blank discs for the next job. The robotic arm will continue to load media into the drives as the duplicated discs are placed in the Output Spindles. Once a writer drive (any drive) detects another Master disc, the same process is repeated for the new Master disc. Setting Counters and Assigning Names Two frequently used tasks are setting counters and assigning names to partitions. Directions for these tasks are given here. 7.1 Setting Counters The autoloader frequently gives you the option to set a counter so that the machine can keep track of the number of copies made. Follow these steps when you see a Counter Selection Menu: The Counter Selection Menu lets you set how many copies you want to make for your project. The Counter Selection feature tells the autoloader to count Counter: No Counter the number of successful copies you have made and stop the job when the desired number of copies has been reached. You can select “No Counter” if you prefer to copy continuously with no interruption. (It will still count the number of copies, but it will not notify you when to stop.) To select the “No Counter”, simply press the OK button when you see the screen above. Or, you can select “Specify Counter” between 1 to 9999 by pressing the Up or Down button to go to the Specify Counter menu: Counter: Press the OK button to select this option. You will see the next SpecifySpecify Counter Counter menu. Specify Counter: To specify the number of copies for your project, you need to enter/input a [0 ] OK? four-digit number. If you need to specify a number that is less than four digits, fill the leading spaces with zeros (any leading zeros will be skipped). Examples of four-digit numbers are “0234” (two hundred and thirty four), or “0010” (ten). To enter the number, you need to use the Up or Down button to select the number for each digit and use the OK button or the ESC button to move the cursor position right or left. Once you've finished, move the cursor to “OK” and press the OK button. For example, if you want to specify a counter value of 21 (twenty one). The 4-digit value would be “0021.” 12 • Setting Counters and Assigning Names MICROBOARDS TECHNOLOGY, LLC HCL Series To input the desired quantity, do the following: • Make sure the cursor is located at the first position (First blinking position): Specify Counter: [0 ] OK? .. Press the Down button repeatedly until “0” is displayed. .. Press OK button once to move the cursor to the next position. .. Press the Down button repeatedly until “0” is displayed. .. Press OK button once to move the cursor to the next position. .. Press the Down button repeatedly until “2” is displayed. .. Press OK button once to move the cursor to the next position. .. Press the Down button repeatedly until “1” is displayed. • Now, “0021” is displayed, press OK button once and the cursor moves to “OK”. Then, press the OK button once to submit your counter value. The loader will now start loading disc from the input spindles and place them into all drive trays. 7.2 Editing Names When you create either a new user or a partition, you need to assign a name to it. The example shown here shows how to name or rename a partition, but the process for naming or renaming the user name is identical. During the process of creating a new partition, you will see the Edit Partition Name menu: Edit Partition Name [ ] OK? To enter the name, use the Up or Down button to select the character and use the OK or ESC button to move the cursor position. Once you've finished, move the cursor to “OK” and press the OK button. The name for a partition can be up to eight characters long, and the characters can be any alpha (A...Z) or numeric (0...9) value. For example, if you want to name the partition for your master disc as “DVD1”, then follow this example: .. Press the Down button repeatedly until “D” is displayed. (You can also hold the Down button down, and the autoloader will scroll through the alphabet.) .. Press the OK button once to move the cursor to the next position. .. Press the Down button repeatedly until “V” is displayed. .. Press the OK button once to move the cursor to the next position. .. Press the ...
Este manual também é adequado para os modelos :DVD-player - HCL Series (769.29 kb)
DVD-player - HCL-6000 (769.29 kb)
DVD-player - HCL-8000 (769.29 kb)