Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
Initial Setup(Connection) You Can • record and view both scrambled and unscrambled channels if additional equipment is added. This connection requires: two converter boxes, an A/B switch, and a 2-way splitter. IN FROM ANT. OUTTOTV IN 1 VHF/UHF OUT IN 2IN 1 Cable Box OUTINOUT 2OUT 1 2-Way Splitter OUT A/B Switch IN Connect With Two Cable Boxes using Multi-brand control feature. ANT or CATV IN VIDEO AUDIOR L OUT TV DVD/VCR DECK Cable Box VHF/ UHF You Cannot • view channel other than the one selected for any type of recording. • do a Timer recording of a channel unless you select it on the Cable Box. Connect AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENT or S-VIDEO mode). If your TV has COMPONENT VIDEO INPUT, set SELECT SW to COMPONENT VIDEO OUT. If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, set SELECT SW to S-VIDEO OUT. When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN. Connections For DVD Only 1 2 3 • You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHF/UHF OUT TO TV, and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available onlyNotes Note • The picture will not be displayed if the SELECT SW is not set to the correct video output. from the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV. • PROG functions on the remote are not available when using S-VIDEO OUT and COMPONENT Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG. From DECK’s DVD/VCR DECK A/V OUTPUT TV 13 VIDEO AUDIO R COMPONENT VIDEO OUT AUDIO OUT2 S-VIDEO OUT SELECT DVD OUTPUT Y P B P R R L IN Y PB PR S-VIDEO IN LR L IN or IN Connections (continued) Audio Connections Ready Checklist Turn down the volume, then turn DECK, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables. DECK Amplifier Speaker DVD/VCR DECK Speaker Amplifier Speaker AUDIO OUT2 AUDIO IN R LL R Enjoying digital audio output from the digital audio output connector Notes on audio output from the optical digital audio output connector Disc Sound recording format Optical digital audio output from connector DVD Dolby Digital Dolby Digital bitstream (1-5.1 ch) or OFF (no output)*1 Linear PCM (48/96 kHz 16/20/24bit) Linear PCM (2ch) (48 kHz sampling/16 bit only)*2 or no output*1 dts Bitstream or no output*1 Video CD MPEG 1 PCM (44.1 kHz sampling) CD Linear PCM Linear PCM (44.1 kHz sampling) MP3 MP3 Linear PCM (It depends on the MP3 file) *1 The type of audio output from the connector can be selected by the Settings for DVD Operation. (See p. 46.) *2 Sound having 96 kHz sampling is converted into 48 kHz sampling when it is output from the DECK’s optical digital audio output connector. For your reference: • Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc. • Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit. • If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic Surround Sound Decoders please contact your local dealer. Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. 14 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com DECK Dolby Digital Decoder Amplifier Speaker or DECK dts (digital theater systems) Decoder Amplifier Speaker When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream is output from the DECK OPTICAL digital audio output connector. When DECK is connected to a Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home. [An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or dts decoder is used.] Initial Setup(Connection) Notes on connecting an optical digital audio cable (optional) • Firmly connect the cable to the connector. Amplifier OPTICAL DVD/VCR DECK Front Speaker Front Speaker Surround Speaker Surround Speaker Center Speaker Subwoofer Decoder with Dolby Digital dts processing (optional) Optical Digital Audio Cable (optional) To Optical Digital Audio Input Connect...
Este manual também é adequado para os modelos :DVD-player - PV-D4732S (3.09 mb)
DVD-player - PV-D4732 (3.09 mb)