|
Instruções de Operação Panasonic, Modelo WJHD100
Fabricante : Panasonic
Arquivo Tamanho: 2.59 mb
Arquivo Nome : WJHD100.PDF
Língua de Ensino:  
|
 
|
|
|
Ir para baixar
por este dispositivo também tem outras instruções :
Facilidade de uso
White the clock is on daylight saving time, an asterisk * appears in the time and date display on the LCD and on the video monitor. (D HDD Access indicator [HDD] Lights while the disk is being accessed. © Full Indicator [FULL] Blinks when the remaining disk capacity reaches the preset value, and lights when the disk is full. ® Lock Indicator [LOCK] Lights when buttons and JogDial on the front panel are disabled. (D Memory Card Slot [MEMORY CARD] Open the lid to insert the CompactFlash card into the slot or to remove it from the slot. The card is used to store stiil pictures for browsing through them on a personal computer. ] [▼] Press this button to start playing back still pictures field by field. The LED lights in the step playback mode. Press this button to move ;he cursor downward in a setup menu on the monitor. 6 © REW/FF and Up Button [REW/FF [A] Press this button to rewind or fast-forward the recorded field. The LED lights in the REW/FF mode. Press this button to move the cursor upward in a setup menu on the monitor. @ JogDial [PUSH - II PAUSE] [SET] Press the JogDial to pause or restart playback. Rotate the JogDial to access the desired field while rewinding, fast-forward and playing back. Rotate the JogDial to search the oldest picture recorded on the disk for playing back in chronological order. Rotate the JogDial to select a parameter in a setup menu. Press the JogDial to enter the selected parameter and move the cursor to the next position on a setup menu. Hold down the JogDial to copy still pictures to the CompactFlash card. ■ Rear View © Audio Input [AUDIO IN] RCA standard jack accepts an unbalanced -10 dB and 10 kft line input audio signal supplied from an external device. @ Audio Output [AUDIO OUT] RCA standard jack supplies an unbalanced -10 dB and 600 ft line output audio signal to an external device. ©> Camera Switching Output [CAMERA SW OUT] This jack is for connecting an external device such as a video multiplexer receiving multiple camera inputs. The switching signal supplied makes the connected device switch from one camera to the other. Use this terminal only when the recording field rate is lower than 10 fps. <8> Video Input [VIDEO IN] This BNC accepts a video signal supplied from a camera or video multiplexer. A 75 ft termination is made unless the video output terminal is connected. Video Output [VIDEO OUT] This BNC supplies a video signal looped through the video input terminal. Connect with a monitor TV to check the input picture, or the next WJ-HD100 in a SERIES connection. @ Monitor Output [MONITOR OUT (PLAY)] This BNC supplies playback pictures stored on the hard disk, or setup windows. Connect with a monitor TV. @ RS-232C Port [RS-232CJ Through this 9-pin D-Sub connector the digital disk recorder communicates with the personal computer. Use a reverse type cable for connection with the personal computer. @> Data Port [DATA] Connect with equipment in the PS-Data chain or a system controller. Mode Switch [MODE] Use this switch for setting unit addresses and initializing all disk contents and setup data. Terminal Board ® Remote In Terminal These are connected with switches for external control of major operations on the front panel such as JOG-CLICK, JOG-LEFT, JOG-RIGHT, ALARM SEARCH, STEP, REW/FF, STOP/SETUP, PLAY and REC. © Time Adjust Terminal IN and OUT terminals for synchronizing the internal clock with connected external devices. 7 Status Out Terminal These terminals supply the following status information: PLAY OUT, REC OUT, AUTO OFF OUT, DISK END OUT. AUTO OFF OUT: AUTO OFF OUT signal turns active (active when low), and playback...
Escreva a sua própria avaliação do dispositivo
|
|
)