Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. –12– EN 1L01 The following show examples of connections commonly used to connect the DVD player either TV and other components. Notes .Be sure to turn off the power to all components in the system before connecting another component. .Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the DVD player. Dolby Digital decoder CONNECTION TO AN AUDIO SYSTEM Method 1 Method 2 Stereo system DTS decoder AUDIO DVD Audio Input Jacks Analog Audio Out RL ANALOG AUDIO OUT R L Digital Audio Input Jacks Digital Audio Out COAXIAL OPTICAL COAXIAL OPTICAL or • Method 1 DVD Player + Stereo system • Method 2 DVD Player + Dolby Digital decoder or DTS decoder Notes .If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio output in the setup mode. .If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. .Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. .The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck. .Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.(See page 27 to set ON for Dolby Digital and DTS) Optical cable (not supplied) .Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 15 cm or more when storing them. .Use a cable which is 3m or shorter. .Insert cable plugs firmly into the connectors when making connections. .If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector. English –13– EN 1L01 CONNECTION TO A TV (FOR VIDEO) Method 1 Method 2 Method 3 Basic Audio Good picture Better picture Best picture TV DVD COMPONENT S-VIDEO IN R L VIDEO IN S-VIDEO IN CR Y CB CBR L VIDEO OUT or or AV Cable S-Video Cable Video Cables Analog Audio out Video out S-Video out Component Video out • Method 1 DVD Player + TV with Video Input Jack • Method 2 DVD Player + TV with S-Video Input Jack • Method 3 DVD Player + TV with Component Video Jacks Notes .Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above. Note .The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator. –14– EN 1L01 PLAYING A DISC DVD CD VCD PLAYING A DVD VIDEO OR AN AUDIO CD OR A VIDEO CD Getting started Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.) 1 Press the POWER/STANDBY button. .The power will turn on. 2 Press the OPEN/CLOSE button. .The disc loading tray will open. 3 Place a disc into the tray. .Make sure the disc is sitting properly in the correct recess, with the label side up. 4 Press the PLAY button. .The tray will close automatically, and playback will then start from the first chapter or the first track of the disc. With some discs, if the tray has been closed by pressing the OPEN/CLOSE button, You need to press the PLAY button to start the disc. .When you playback the DVD or Video CD which a title menu is recorded, it may appear on the screen. In this case, refer to “USING THE DVD MENUS” or “USING THE TITLE MENU”. 5 Press the STOP button to stop play. Notes .While the setup menu is shown you can not open or close the tray. .A “prohibited icon” may appear at the top-right on the TV screen during operation, ...