Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Beep A tone sounds if a problem occurs with the unit. [On] [Off] Note: • To stop the tone that is sounding, press any button except the [POWER] and [REC ] buttons on the front panel. Finalizing speed Select the speed at which writing occurs when finalizing. [1x] [4x] 1x: Writing occurs at normal speed. Select this under normal conditions. This selection ensures a high level of compatibility with other DVD players. 4x: When recording on discs compatible with 4x speed, writing happens at 4x speed, thus shortening the time it takes for finalizing. Finalizing may fail with some types of discs. Connection TV Aspect (see page 14) Choose the setting to suit your monitor television and preference. [Norm (4:3)] [Wide (16:9)] Progressive (NTSC) [On] [Off] On: Select when connecting to a NTSC monitor television with component video input terminals. Off: Select when connecting to a PAL monitor television. TV System [PAL] [NTSC] ( for LQ-MD800P ) [PAL] [NTSC] ( for LQ-MD800E ) PAL: Select when connecting to a PAL or Multi-system monitor television. Select to record television programs and PAL input from other equipment. NTSC: Select when connecting to a NTSC monitor television. Select to record NTSC input from other equipment. Note: • When changing the TV system, change this setting only, close the SETUP screen, then turn the unit off and on again. Norm (4:3) TV Settings (DVD) PLAY You can select how to reflect the image on the monitor television, when you watch 16:9 images (DVD-Video) on 4:3 monitor television. [Pan & Scan] [Letterbox] Pan & Scan: Video recorded for a widescreen is played with the sides cut off if the Pan & Scan was specified by the producer of the disc. 16:9 software prohibited from being shown in the Pan & Scan style will appear in the letterbox style (with black bands above and below the picture) despite the setting here. Letterbox: Video recorded for a widescreen is played in the letterbox style. Norm (4:3) TV Settings (DVD-RAM) PLAY You can select how to reflect the image on the monitor television, when you watch 16:9 images (DVD-RAM) on 4:3 monitor television. [Norm (4:3)] [Pan & Scan] [Letterbox] Norm (4:3): Programs played as recorded. Pan & Scan: Video recorded for a widescreen is played with the sides cut off if the Pan & Scan format is specified at the time of recording. Letterbox: Video recorded for a widescreen is played in the letterbox style. Note: • To change the TV system (PAL/NTSC) setting, while stopped, keep pressing [STOP ] and [OPEN/CLOSE ] on the main unit for 5 or more seconds. After that, turn the unit off and on again. The TV system is set to NTSC or PAL alternately. – 35 – Maintenance and Handling Maintenance Disc handling The precision parts in this unit are readily affected by the environment, especially temperature, humidity and dust. Observe the following points to ensure continued listening and viewing pleasure. To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. Dust and dirt may adhere to the unit’s lenses over time, possibly making it impossible to record or play discs. Use the recommended DVD-RAM/PD lens cleaner (LF-K123LCA1) about once every year, depending on frequency of use and the operating environment. Read the lens cleaner’s instructions carefully before use. • The lens cleaner may make some sound during use but this does not indicate a malfunction. • “NO READ” appears on the unit’s display when cleaning finishes. Do not use irregularly shaped discs, such as heart-shaped. (These can damage the unit.) How to hold a disc Do not touch the recorded surface. If there is dirt or condensation on the disc • Clean and dry with an optional DVD-RAM/PD disc cleaner (LFK200DCA1). • Never use cloths or cleaners for CDs, etc. Handling precautions • Do not write on the label side with a ball-point pen or other writing instrument. • Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. • Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.) • Do not use scratch-proof protectors or covers. • Do not use discs printed with label printers available on the market. • Do not use discs that are badly warped or cracked. Do not place or store discs in the following places • Locations exposed to direct sunlight. • Humid or dusty locations. • Locations directly exposed to a heat vent or heating appliance. – 36 – Glossary Picture type (I/P/B) In order to efficiently record to discs, common data between frames is shared and only that data that differs is recorded for each frame. I-picture: This is the base picture and all data for it is recorded. P-picture: This picture is recreated based on past I-pictures or P- pictures. B-picture: This picture is created from both I- and P-pictures and fills the ga...