Assessments - 0, GPA: 5
(
)
)
|
Facilidade de uso
You do not need to use the audio connecting cord. Some setup adjustments are necessary for the player depending on the components to be connected. Use the setup display to change the various settings. For details on using the setup display, see page 52. If your receiver (amplifier) does not have a built- in Dolby* Digital decoder, MPEG decoder or DTS decoder • To listen to the sound through speakers connected to a receiver (amplifier) which has a digital connector, or to output the sound to a digital component such as a DAT or MD deck Set the “AUDIO SETUP” items in the setup display (page 63) as shown in the illustration below. These are the default settings. AUDIO SETUP AUDIO ATT: AUDIO DRC: DOWNMIX: DIGITAL OUT: DOLBY DIGITAL: MPEG: To set, press , then . To quit, press . OFF STANDARD DOLBY SURROUND CENTER SPEAKER EQ: FLAT ON D-PCM PCM 48kHz/96kHz PCM: 48kHz/16bit DTS: D-PCM ENTER DISPLAY Set the items as shown When you have made the connections using an optical or coaxial digital connecting cord, do not set “DOLBY DIGITAL” to “DOLBY DIGITAL,” “MPEG” to “MPEG,” “DTS” to “DTS” and “48kHz/96kHz PCM” to “96kHz/24bit.” If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged. Note You cannot make direct digital audio recordings of discs recorded in multichannel surround format using an MD deck or DAT deck. If you have an audio component with a built-in Dolby Digital decoder, MPEG decoder or DTS decoder • When you connect an audio component with a built-in Dolby Digital decoder A Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in the setup display (page 64). • When you connect an audio component with a built-in MPEG decoder B Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “MPEG” to “MPEG” in the setup display (page 64). • When you connect an audio component with a built-in DTS decoder C Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DTS” to “DTS” in the setup display (page 64). AUDIO SETUP AUDIO ATT: AUDIO DRC: DOWNMIX: DIGITAL OUT: DOLBY DIGITAL: MPEG: To set, press , then . To quit, press . OFF STANDARD DOLBY SURROUND CENTER SPEAKER EQ: FLAT ON DOLBY DIGITAL MPEG 48kHz/96kHz PCM: 48kHz/16bit DTS: DTS ENTER DISPLAY A B C Notes • When you do not connect an audio component with a built-in Dolby Digital decoder, do not set “DOLBY DIGITAL” to “DOLBY DIGITAL.” • When you do not connect an audio component with a built-in MPEG decoder, do not set “MPEG” to “MPEG.” • When you do not connect an audio component with a built-in DTS decoder, do not set “DTS” to “DTS.” • When you connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector, the Virtual 3D Surround effect cannot be heard. * Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved. Getting 11 5.1 Channel Surround Hookups Getting Started Some DVDs have a sound track with up to 5.1 channels recorded in Dolby Digital, MPEG audio or DTS format. Using a receiver (amplifier) having 5.1 channel inputs and 6 speakers, you can enjoy a more realistic audio presence in the comfort of your own home. “5.1 channel” stands for the 2 front speakers (Left and Right), 2 rear speakers (Left and Right), 1 center speaker, and a subwoofer. Even if you have fewer than 6 speakers, the player appropriately distributes the output signal to the speakers. This player also has a VIRTUAL 3D SURROUND mode. You can use 3D sound imaging to shift the sound of the rear speakers away from the actual speaker position (VIRTUAL REAR SHIFT) or to create 3 sets of virtual rear speakers from 1 set of actual rear speakers (VIRTUAL MULTI REAR, etc.). For details on the VIRTUAL 3D SURROUND mode, see page 36. Note When a DVD has a sound track with 7.1 channels recorded in MPEG audio format, the output audio signals are mixed down to 5.1 channels. Speaker placement For the best possible surround sound, we recommend the following conditions. • Use higher performance speakers. • Use rear and center speakers that match your front speakers in size and performance. • Place the subwoofer between the front (L, R) speakers if possible. Note Do not place the rear speakers farther away from the listening position than the front speakers. Required cords Audio cords (not supplied) (2) For the 5.1CH OUTPUT FRONT and REAR jacks White (L) White (L) Red (R) Red (R) Monaural audio cords (not supplied) (2) For 5.1CH OUTPUT CENTER and WOOFER jacks. S video cord (supplied) (1) For the S VIDEO OUT jack When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise. Do not connect the power cord to a switched mains such as the mains on a receiver (amplifier). Doing so may cause the P...