Assessments - 2, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
TV Type You select Page A wide-screen TV or 4:3 standard TV with the wide-screen mode 16:9 87 4:3 standard TV 4:3 LETTER BOX or 4:3 PAN SCAN 87 H Press ENTER. The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears. YES NO Is this player connected to an amplifier (receiver) ? Select the type of jack you are using. AUDIO OUTPUT L/R DIGITAL OUTPUT I Press X/x to select the item, then press ENTER. • When “NO” or “AUDIO OUTPUT L/R” is selected, Quick Setup is finished and connections are complete. • When “DIGITAL OUTPUT” is selected, the Setup Display for “DOLBY DIGITAL” appears. Proceed to Step 0. continued , J Press X/x to select the item. Choose the item that matches the audio connection you selected in pages 26 to 30 ( through ). D B AUDIO SETUP AUDIO ATT: AUDIO DRC: DIGITAL OUT: DOLBY DIGITAL: MPEG: DOWNMIX: DTS: OFF STANDARD ON DOLBY SURROUND D-PCM DOLBY DIGITAL D-PCM Audio Cord Connection Type You select Page B-2 C-2 D-PCM 91 D DOLBY DIGITAL (only if the 91 amplifier/receiver has a Dolby Digital decoder) K Press ENTER. “DTS” is selected. AUDIO SETUP AUDIO ATT: AUDIO DRC: DIGITAL OUT: DOLBY DIGITAL: MPEG: DOWNMIX: DTS: OFF STANDARD ON DOLBY SURROUND D-PCM PCM OFF OFF ON L Press X/x to select the item. Choose the item that matches the audio connection you selected in pages 26 to 30 ( through ). D B Audio Cord Connection Type You select Page B-2 C-2 OFF 91 D ON (only if the amplifier/receiver has 91 a DTS decoder) M Press ENTER. Quick Setup is finished. All connections and setup operations are complete. If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 91). Note You can directly start Quick Setup only when you run it for the first time. To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 85). Enjoying the surround sound effects To enjoy the surround sound effects of this player or your amplifier (receiver), the following items must be set as described below for the audio connection you selected in pages 26 to 30 ( B through D ). Each of these are the default settings and do not need to be adjusted when you first connect the player. Refer to page 85 for using the Setup Display. Audio Connection (pages 25 to 30) A No additional settings are needed. Hookups B-1 C-1 Item You select Page DOWNMIX DOLBY SURROUND 91 • If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 90). B-2 C-2 D Item You select Page DOWNMIX DOLBY SURROUND 91 DIGITAL OUT ON 91 Playing Discs Playing Discs Playing Discs When playing a disc, make sure that the MS indicator is turned off (Disc mode). To play a DATA-CD, see page 67. Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. MS button/indicator ?/1 button/indicator x N MS ?/1 AUDIO x H 1 Turn on your TV. 2 Switch the input selector on the TV to the player. When using an amplifier (receiver) Turn on the amplifier (receiver) and select the appropriate channel. 3 Press ?/1. The ?/1 indicator (red) changes to green and the front panel display lights up. 4 Insert a disc in the player. If the MS indicator on the player is lit, press MS to turn it off in stop mode. (Disc mode) With the playback side facing down MS button/ indicator 5 Press N on the player or H on the remote. The player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver). After following Step 5 Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 41), VIDEO CD (page 42). To turn off the player Press ?/1. The player enters standby mode and the ?/1 indicator lights up in red. To turn off the player completely, disconnect the AC power cord. While playing a disc, do not disconnect the AC power cord. Doing so may cancel the menu settings. When you turn off the player, first press x to stop playback and then press ?/1. Notes on playing DTS sound tracks on a CD • When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the player. • Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a CD (page 57). • Do not play DTS sound tracks without first connecting the player to an audio component having a built-in DTS decoder. The player outputs the DTS signal via the DIGITAL OUT (OPTICAL) jack even if “DTS” in “AUDIO SETUP” is set to “OFF” in the Setup Display (page 92), and may affect your ears or cause your speakers to be damaged. Notes on playing DVDs with a DTS sound track • DTS audio signals are output only through the...