Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Displays a wide picture with bands on the upper and lower portions of the screen. VR mode only) On Playback is smooth, but with a trade-off against the accuracy of the edit points. 4:3 Pan Scan Select this when connecting to a 4:3 screen TV. Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit. Off You may notice momentary interruption at edited points during playback of a VR mode Playlist. 16:9 Select this when connecting to a wide-screen TV or TV with a wide mode function. ,continued Parental Control (DVD VIDEO only) 6 Select “Code” (geographic area) as the Playback of some DVD VIDEOs can be limited according to a predetermined level, such as the age of the users. Scenes may be blocked or replaced with different scenes. 1 Select “Parental Control” in “Playback,” and press ENTER. When you have already registered a password, go to step 4. 2 Select “Set Password,” and press ENTER. The display for registering a new password appears. 3 Enter your four-digit password using the number buttons, and press ENTER. 4 Select “Standard,” and press ENTER. The “Parental Control : Standard” display appears. 5 Enter your four-digit password using the number buttons, and press ENTER. playback limitation level, and press ENTER. The area is selected. • When you select “Number,” press the number buttons to select and enter a country/area code in the table (page 107), and press ENTER. 7 Select “Change Level,” and press ENTER. The “Parental Control : Change Level” display appears. 8 Enter your four-digit password using the number buttons, and press ENTER. 9 Select the level. The lower the value, the stricter the limitation. Discs rated higher than the selected level will be restricted. 10 Press ENTER. The Parental Control setting is complete. To cancel the Parental Control setting for the disc, select “Off” in step 9. Change Password 1 Select “Parental Control” in “Playback,” and press ENTER. 2 Select “Change Password,” and press ENTER. 3 Enter your four-digit password in the “Current Password” row using the number buttons, and press ENTER. 4 Enter a new password in the “New Password” row using the number buttons, and press ENTER. b Notes • If you forget your password, reset the recorder (page 99). • When you play discs which do not have the Parental Control function, playback cannot be limited on this recorder. • Depending on the disc, you may be asked to change the Parental Control level while playing the disc. In this case, enter your password, then change the level. Angle Indicator (DVD VIDEOs only) On Displays “ ” on the TV screen if various angles (multi-angles) for a scene are recorded on the disc. Off Does not display “ ” on the TV screen. HDMI Settings (HDMI Output) The “HDMI Output” setup allows you to adjust items related to the HDMI connection. You can select “HDMI Output” only when connecting equipment to the HDMI OUT jack. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “Initial Setup,” and press ENTER. 3 Select “HDMI Output,” and press ENTER. The “HDMI Output” setup appears with the following options. The default settings are underlined. After connecting equipment to the HDMI OUT jack, “Screen Resolution,” “4:3 Video Output,” and “Colour” are automatically set to the appropriate settings. Settings and Adjustments ,continued Screen Resolution Selects the type of video signals output from the HDMI OUT jack. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc. 1920 x 1080p Sends 1920.1080p video signals. 1920 x 1080i Sends 1920.1080i video signals. 1280 x 720p Sends 1280.720p video signals. 720 x 576p*1 Sends 720.576p video signals. 720 x 480p*2 Sends 720.480p video signals. 720 x 576i*1 Sends 720.576i video signals. 720 x 480i*2 Sends 720.480i video signals. *1 Can be selected only when “Input Line System” is set to “PAL/SECAM” in the “Basic” setup (page 76). *2 Can be selected only when “Input Line System” is set to “NTSC” in the “Basic” setup (page 76). b Notes • When picture noise appears after you change the “Screen Resolution” setting, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. • When “Colour” is set to “YCbCr 4:2:2” in the “HDMI Output” setup, you cannot select “720 x 576i” (or “720 x 480i”). 4:3 Video Output This setting is effective only when you set “TV Type” to “16:9” in the “Playback” setup. Adjust this setting to watch 4:3 aspect ratio signals. If you can change the aspect ratio on your TV, change the setting on your TV, not this recorder. Note that this setting is effective only for HDMI connection. Full Select this when you can change the aspect ratio on your TV. Normal Select this when you cannot change the aspect ratio on your TV. Shows a 4:3 size video with the aspect ratio as it is. 16:9 aspect ratio TV Colour Selects the method of outputt...