Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Component video separates the picture element into black and White (Y). blue(Pb), red(Pr) signals to present most clear and clean images. ■ If you change the component video output switch when the power is off. the startup screen may not be displayed normally. ■ Make sure that the color coded connections match. The Y. Pb. Pr component output jacks of your DVD Recorder must be connected to the exact corresponding component input jacks on your TV. Otherwise, red or blue images will be displayed on the TV screen. ■ Make sure that the left and right audio output jacks of your DVD Recorder are connected to the left and right audio input jacks of your TV respectively. (See page 18) English -17 Con Con I Method 4 : Connecting to Component video input jacks(Y,Pb,Pr) in 480p mode Step 4 : Connecting the Audio cable Your TV must support progressive scan input to allow you to watch 480p video output. 1. Connect Component video cables (not supplied) between the COMPONENT VIDEO OUT jacks on DVD Recorder and COMPONENT VIDEO IN jacks on the TV (or AV amplifier). 2. Set the Component video out select switch on the back of your DVD recorder to 480p video output mode. Make sure that the disc has stopped completely before changing the switch position. There are several ways to connect your DVD Recorder. Select the audio connection that best suits you below. • Method 1 : Connecting to your TV • Method 2 : Connecting to a stereo amplifier (analog audio out / digital audio out) • Method 3 : Connecting to an AV amplifier with a digi tal input jack COMPONENT VIDEO OUT SELECT 525P (480P)—[Q 525i (480i) -[ 0 <1— 0 pm(—cQJJJiq © Pr<|—i=0HpD-J TV If you change the component video output switch when the power is off. the startup screen may not be displayed normally. Make sure that the color coded connections match. The Y. Pb and Pr component output jacks of your DVD Recorder must be connected to the exact corresponding component input jacks on your TV Otherwise, red or blue images will be displayed on the TV screen. Once 480p video output mode is selected. Video. S-Video and 480i outputs are disabled. Make sure that the left and right audio output jacks of your DVD Recorder are connected to the left and right audio input jacks of your TV respectively. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems. Inc. | Method 1 : Connecting to your TV This connection will use your TV’s speakers. 18- English | Method 2 : Connecting to a stereo amplifier with analog input jacks If your stereo amplifier only has audio input jacks (L and R), use the analog audio out jacks. Front(L)speaker Front(R)speaker | Method 3: Connecting to an AV amplifier with a digital input jack If your AV amplifier only has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital or DTS sound, you will set up the audio settings. (See page 28) o i£ Rear(L) Rear(R) □ X JL D Front(L) □ □ Front(R) Subwoofer Center English -19 Con Con Step 5 : Connecting external devices This allows you to connect your DVD Recorder to other external devices and view or record their outputs. • Method 1 : Connecting a VCR. Set-Top Box(STB) or DVD player to the AUDIO/VIDEO LINE 1 IN jacks • Method 2 : Connecting a Camcorder to the LINE 2 jacks • Method 3 : Connecting a Camcorder to the DV IN jack | Method 1 : Connecting a VCR, Set-Top Box(STB) or DVD player to the AUDIO/VIDEO LINE 1 IN jacks Connecting a VCR or external device to AUDIO/VIDEO LINE 1 IN jacks of the DVD Recorder. You can record from connected equipment (VCR. STB or DVD). NOTE You can also use the LINE 2 IN jacks on the front panel of the DVD Recorder. When the S-Video jack and Video jack are both connected, the S-Video jack will have priority. Line Selection will be automatically done. Copy protected content cannot be recorded. | Method 2 : Connecting a Camcorder to the LINE 2 jacks You can also use the LINE 2 IN jacks on the front panel of the DVD Recorder. You can record from connected equipment. When an input source is inserted into LINE 2 while viewing TV the input will be switched to LINE 2 automatically. | Method 3 : Connecting a Camcorder to the DV IN jack If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder. With DVs, only input jacks can be used. 20- English Step 6 : Connecting the Power Step 7 : Preparing the Remote Cord Control After all connections are complete, plug the power cord in the wall outlet. “AUTO” in the front panel display flickers. This means that the current time is being set automatically (Auto Program) through the antenna under connection and also the channel is being set. The setup may take a few minutes. When it normally operates, the current time is automatically set and displayed in the front panel display. If “--...